SPI_slave代码，已经实用！

说明：  sata3.0协议及FPGA各模块实现,有代码及文档说明。(Sata3.0 protocol and FPGA module implementation, with code and documentation.)

售货机-VHDL语言-已调试通过 真的很好用哦~适合一切学习EDA的初学者，能够让你轻松度过EDA课！~(Vending machine-VHDL language- has been really good with debugging by Oh ~ EDA for all beginners to learn, to let you easily through the EDA class! ~)

DS18B20温度测量程序 之后用于在LCD显示屏上显示对应的温度(DS18B20 test code)

VHDL Code For Full Adder By Data Flow Modelling

说明：  通过一个计数器来实现输出信号的占空比要求，可以将duty_cycle分配到拨码开关上,LED分配到发光二极管上,然后调节拨码开关,即可看到LED的亮度发生变化.(The duty cycle of the output signal can be assigned to the dial switch by a counter, and the LED can be assigned to the light emitting diode. Then the brightness of the LED can be seen by adjusting the dial switch.)

积分器的一种实现方法：每级积分器都是一个反馈系数为1的单极点IIR滤波器, 其传递函数为:(An implementation of an integrator: each stage integrator is a single pole IIR filter with a feedback factor of 1:)

通过MATLAB产生单脉冲信号的数据，存储下来作为verilog代码实现的DDS的数据源，用于验证DA数据的ddio的调试是否有问题。(The data of monopulse signal generated by MATLAB is stored as the data source of DDS implemented by Verilog code to verify whether the ddio debugging of DA data is problematic.)

用VerilogHDL写的spi 核的例子(A simple example of SPI core using Verilog HDL)

用verilog编写的分辨率提高的源代码 采用双线性插值(Written resolution with the verilog source code to improve the use of bilinear interpolation)

针对京微雅阁的CME300 FPGA教程，里面有几个例程，并附有源代码，初学者可尽快入门。(For Beijing micro Accord CME300 FPGA tutorial, there are a few routines, with source code, beginners can start as soon as possible.)