OFDM_OPTIMAL_tx

基于窗函数法的FIR数字滤波器设计与实现，程序比较简单，易懂。(FIR digital filter based on window function.)

通过matlab仿真说明从音频中提取背景音乐的方法，并通过dsp实现(Matlab simulation shows that by extracting from the audio background music of the method, and achieved through the dsp)

Three-Phase Saturable Transformer This demonstration illustrates use of Three-phase, Powergui, and Multimeter blocks to study transformer saturation phenomenon G. Sybille (Hydro-Quebec)

使用低通滤波器从含有噪声的信号中提取有用的正弦波 (见实验指导书 实验九 数字滤波器中的第一题) 目的：用数字滤波器从含有高频噪声的采样数据中提取正弦信号。 要求：①输入信号为一正弦波，并加入一个白噪声的干扰来模拟信号传输中的随机干扰信号（用以模拟含有噪声采样序列）。 （模拟含有噪声采样序列具体可用正弦波信号叠加高频噪声来实现，为了使滤波效果明显，本实验的高频噪声是用高频均匀分布白噪声（Uniform）通过Butterworth高通滤波器过滤生成的，高通滤波器的截止频率设为10倍输入信号频率。） ②在程序中设计一个低通巴特沃斯滤波器，以滤除信号中的噪声分量，提取输入的正弦波信号 。 ③可调节信号滤波器的截止频率和阶数，可显示滤波前与滤波后的时域信号。 ④给出滤波前与滤波后的频谱特性的显示。 (Using low pass filter extracting useful sine wave signal containing noise(see experiment instruction digital filter in the first nine questions)Objective: to use digital filter sampling data extract containing high frequency noise sine signal.Requirements: (1) the input signal is a sine wave, and add a white noise interference to simulate the random disturbance signal of the signal transmission (to simulate contains noise sampling sequence).(simulated the sampling sequence contains noise available sine wave signal superposition of high frequency noise, in order to make the filtering effect is obvious, the experiment of high frequency noise is Uniform distribution with high frequency white noise (Uniform) by Butterworth high-pass filter to filter generated, high-pass filter cutoff frequency set to 10 times the size of the input signal frequency.)(2) in the program design a low-pass butterworth filter, in order to filter out the noise in the signal component, extract the input sine wav)

对16进制的QAM调制信号的matlab仿真 已完美运行通过(On the 16-band QAM modulated signal matlab simulation has been run through a perfect)

it presence the effect of stiffness variation in active air_suspension system.

正交匹配追踪算法的压缩传感matlab代码，又需要的可以看一下~(failed to translate)

说明：  Hausdorffn距离的Matlab程序(Matlab Program for Hausdorffn Distance)

联合格自适应交互多模型算法。根据目标情况调整格间距。(United grid adaptive interacting multiple model algorithm.)

The model used for creating the reference voltage is shown in Fig. 4. First, photovoltaic output current (Ipv) and output voltage (Vpv) are passed through a first order low pass filter with a magnitude of G = 1 and a time constant of T = 0.01 seconds in order to filter out the high frequency components or harmonics from these signals as shown in Fig. 5 and Fig. 6. The filtered current and voltage signals (Ipv_F and Vpv_F) are then fed into the MPPT control block that uses the Incremental Conductance Tracking Algorithm. An algorithm that is based on the fact the slope of the PV array power curve shown in Fig. 7 is zero at the Maximum Power Point (MPP), positive on the left of the MPP, and negative on the right. The MPP can thus be tracked by comparing the instantaneous conductance (I/V) to the incremental conductance (∆ I/∆ V) [11] as in (1):