EEPROM24c16读写程序，需要的可以参考一下

单片机的键盘和LCD（T6963C)的输入/出平台.-SCM keyboard and LCD (T6963C) of the input/out platform.

单片机驱动LED点阵显示屏显示汉字的程序 有上下只有有移动-MCU dir LED display

单片机普通io口模拟标准串口，可以实现各种波特率传输。-Ordinary single-chip analog io standard serial port, you can realize all kinds of baud rate transmission.

Used to display a hexadecimal value in 7 segment LED display using an interrupt in PORTB upper 4 bits.

串口是单片机重要的功能部件，通过简单的串口编程，让初学者进入16单片机的世界-Serial single-chip are the essential features through a simple serial port programming, so that beginners to enter the world of single-chip 16

LT_1B msp430开发板例子程序－TA_-LT_1B msp430开发板例子程序－TA_11

角度传感器KMZ41+UZZ9001初始化和读写程序-Angle sensor KMZ41+ UZZ9001 initialization and read-write process

这是一个波形选择菜单，通过开发板上的按键，选择波形，幅度，频率的等各参数，然后发送给下位机。让其产生需要的波形。-This is a waveform selection menu, through the development of on-board buttons, select the waveform, amplitude, frequency and other parameters, and then sent to the next bit plane. The need to generate the waveform.

用89S52编的的蜂鸣器发声，有点简单，但最为一个发声的实力来说足够了-89S52 series with the buzzer sound, a bit simple, but most of the strength of a voice enough for the

GPS定位信息的单片机控制显示系统，主要讲述GPS模块常用的NMEA0183命令，并且给出单片机的访问-GPS positioning information display system of single-chip control, mainly on the GPS module used NMEA0183 orders, and gives access to single-chip microcomputer