登录
首页 » VHDL » 试设计一种彩灯控制器控制8盏灯。该彩灯控制器有4种自动切换的花样。第一种花样为彩灯从右到左,然后从左到右逐次点亮,全灭全亮;第二种花样为彩灯两边同时亮一个逐次向...

试设计一种彩灯控制器控制8盏灯。该彩灯控制器有4种自动切换的花样。第一种花样为彩灯从右到左,然后从左到右逐次点亮,全灭全亮;第二种花样为彩灯两边同时亮一个逐次向...

于 2022-08-19 发布 文件大小:1.37 kB
0 184
下载积分: 2 下载次数: 1

代码说明:

试设计一种彩灯控制器控制8盏灯。该彩灯控制器有4种自动切换的花样。第一种花样为彩灯从右到左,然后从左到右逐次点亮,全灭全亮;第二种花样为彩灯两边同时亮一个逐次向中间移动再散开;第三种花样为彩灯两边同时亮两个逐次向中间移动再散开;第四种花样为彩灯两边同时亮三个,然后四亮四灭,四灭四亮,最后一灭一亮。四个花样自动变换,重复以上过程。输入时钟频率为500Hz,灯亮的时间在1―4秒之间,可以自由控制。电路中以“1”代表灯亮,以“0”代表灯灭。-Lantern try to design a controller to control 8 lights. The controller has four kinds of lanterns automatically switch the pattern. The first lantern pattern for right-to-left, and then lit from left to right each time, the whole body light second pattern for a lantern light at the same time on both sides of successive spread to the middle of moving again third pattern for lantern light at the same time on both sides to the middle of two successive re-dispersed mobile fourth pattern for the lantern light at the same time on both sides of the three, then four out four bright, four out four-liang, the last light out. Automatically transform the four patterns, repeat the process above. Input clock frequency of 500Hz, the time for lights between 1-4 seconds, they can con

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • 并串转换模块,内含有另个.vhd文件。一个是自己写的比较简单 另一个是参考的。...
    并串转换模块,内含有另个.vhd文件。一个是自己写的比较简单 另一个是参考的。-And the string conversion module, which contains another one. Vhd file. One is its relatively simple to write the other is the reference.
    2022-01-25 21:05:32下载
    积分:1
  • generate-coordinates
    使用VHDL编写语言,巧妙的利用计数器和循环输出一个坐标系,由于VHDL出现负数比较麻烦,全部由正数代替,输出一个原点在中心,半径128的256×256的坐标。方便坐标变换以及用此坐标做算法。(Use of VHDL language, clever use of counter and loop outputs a coordinate system, because VHDL negative too much trouble, all replaced by a positive number, the output an origin at the center, radius 128 256 256 coordinates. Convenient coordinate transformation and coordinate to do with this algorithm.)
    2013-08-28 11:03:46下载
    积分:1
  • verilog based Real Time clock with manual input implement on fpga
    它是一个基于verilog的数字时钟,显示时-分-秒,它可以手动输入,并为时、分和秒分配3个开关第二,它数字时钟频率是实时设置的。我自己用逻辑开发的。。。
    2022-01-26 02:23:56下载
    积分:1
  • GTX4
    光纤发送接收模块,verilog编写,主要用于光纤的发送和接收,波长1310nm(Fiber optic transmitter receiver module, verilog written primarily for transmitting and receiving the optical fiber, wavelength 1310nm)
    2016-06-28 14:06:40下载
    积分:1
  • 2022-01-26 03:14:33下载
    积分:1
  • SDRAM
    verilog编写的SDRAM实验,有串口调试助手和相关资料!!!!!!!!!!!!!!!!!!!!!(Verilog prepared by the SDRAM experiment, a serial debugging assistant and related information!!!!!!!!!!!!!!!!!!!!!)
    2014-09-13 11:24:46下载
    积分:1
  • SRAM
    进阶实验之SRAM测试,由verilog编写,可直接对sram进行存写(Advanced SRAM test experiments, written by the verilog, can be stored directly on the sram write)
    2011-08-18 01:58:56下载
    积分:1
  • fpgaspi
    LabVIEW FPGA SPI implementation
    2013-04-30 00:03:18下载
    积分:1
  • 8051corelcd
    fpga上实现的51内核,带有LCD试验,顺利试验成功很好用。(on fpga implementation of 51 core with LCD test, successfully tested well with the smooth.)
    2014-03-30 14:35:20下载
    积分:1
  • saa7113_vhdl-config
    saa7113_配置.SAA7113视频解码系列芯片的一种,8位彩色配置(saa7113_ configuration. SAA7113 video decoder chips in an 8-bit color configuration)
    2013-11-26 08:57:58下载
    积分:1
  • 696516资源总数
  • 106914会员总数
  • 0今日下载