embestLPC1788学习板ucosii移植代码

这是一个比较旧的脉冲集抄电表的工程，不过还是有借鉴意义的。-this is a software for pulse electric。

资源描述This application note shows how to control a permanent magnet synchronous motor (PMSM) with the sensorless field-oriented control (FOC) algorithm, using an ARM® Cortex®-M0-based PSoC 4 device. The FOC algorithm is frequently used in motor control applications because it allows motors to operate with less noise and more stable torque output than other algorithms. Sensorless FOC adds the advantage of reducing the cost due to the absence of rotor position sensors. Sensorless FOC is used in many applications including consumer (air conditioner, refrigerator), industrial (blower, pump), and commercial (elevator, escalator) products.

此源码为KEIL uVision3 for ARM 的ocm12864系列字符液晶显示模块。-This source for the KEIL uVision3 for ARM s ocm12864 Series Character LCD Module.

凌阳的资料文档，数码相机方面的一些资料和文件，非常有用了-sunplus datasheet and related files.very good

ucos-2在lpc2100上的移制例子。-CENTER-2 in the lpc2100 shift system examples.

IAR 环境 LPC2478 的串口程序-IAR environment, LPC2478 serial program

本例演示如何配置提姆周在PWM（脉冲宽度调制方式）。四PWM信号产生不同的占空比送入机器人CC电机相。显示菜单以不同转速之间选择

本程序为完成各种中断的演示.at91sam7s64芯片,ads1.2编译器.代码说明： 1)完成基本的初始化 2)初始化PIO,IRQ,FIQ,software_interrupt等 3)驱动板上的四个按键(PB1,PB2,PB3,PB4) 4)初始化DEBUG口，Usart1等 5)初始化定时器timer0,timer1等-procedures for the completion of the various demonstration interrupted. At91sam7s64 chips ads1.2 compiler. source : 1) completion of the basic initialization 2) initialization PIO, IRQ, FIQ, software_interrupt three) driver board the four buttons (PB1. PB2, PB3, PB4) 4) initialization DEBUG mouth, Usart1 five) initialize the timer timer0, timer1 etc.

CMX990 demonstration board (DE9901)

这是S3C2443的BOOTLOADER-This is the S3C2443 BootLoader