com prepared by the procedures, they can add functionality and can be used for d...

云台根据其回转的特点可分为只能左右旋转的水平旋转云台和既能左右旋转又能上下旋转的全方位云台。一般来说，水平旋转角度为0°～350°，垂直旋转角度为+90°。恒速云台的水平旋转速度一般在3°～10°/s，垂直速度为4°/s左右。变速云台的水平旋转速度一般在0°～32°/s，垂直旋转速度在0°～16°/s左右。在一些高速摄像系统中，云台的水平旋转速度高达480°/s以上，垂直旋转速度在120°/s以上 -Yuntai rotation in accordance with its characteristics can be divided into only about the level of rotation and can rotate around Haeundae rotating up and down while rotating omni-directional PTZ. In general, the level of rotation angle 0 ° ~ 350 °, vertical rotation angle for+ 90 °. The level of constant rotation speed Yuntai generally 3 ° ~ 10 °/s, the vertical speed of 4 °/s or so. The level of variable rotation speed Yuntai generally 0 ° ~ 32 °/s, vertical rotation speed 0 ° ~ 16 °/s or so. In some high-speed camera system, the level of Yuntai rotating at speeds of up to 480 °/s or more, vertical rotation speed 120 °/s over

串口通信的东东 串口通信的东东串口通信的-Dongdong serial communications serial communications serial communications Dongdong

windows下支持并发读写串口的串口类-windows to support literacy with the serial serial category

UART接口的VERILOG代码，经过调试成功！-UART interface Verilog code, after the successful commissioning!

在VC++6.0中用MSComm控件编程，可以实现串口接收数据和发送数据，数据分别显示在接收框和发送框中。 -used in VC 6.0 MSComm programming, can achieve serial receiving data and sending data Data were displayed at the receiving box and this box.

这是一段c51编的一段有关串口通讯的代码-This is a decoder for the series of the serial communications code

显示West4170的波形, 并可读取或设置所有的参数-West4170 waveform display can be read or set all the parameters

本文介绍的用 89C51 单片机I/O 口模拟实现串行通信的方法，已成功 地应用在某电压数据采集系统中，实践证明能可靠地传送和接收数据。-This article describes using 89C51 microcontroller I/O port Serial communication simulation method has been successfully applied in a certain voltage data acquisition system, the practice has proven to be a reliable way to send and receive data.

机器人控制的串口通信调试程序,包含角度，速度控制。- Serial Communication for Robot controlling

在vb中用字符串的形式来处理串口协议，具有一定的通用性！本程序用来控制伺服电机，调试通过！-vb used in a string of serial form to the agreement, which have a certain commonality! Procedures used to control the servo motor, debugging through!