~ VHDL源代码的FFT IP核

全加器的VHDL程序实现及仿真-full adder VHDL simulation program and

使用Altera公司的FPGA进行VHDL开发。使用quartus2 9.0软件在EP1C3T144C8开发板上实现对一个十字路口的交通灯的控制，包括4个红绿灯和4个2位的数码倒计时器。-The use of Altera" s FPGA-VHDL development. Use quartus2 9.0 software EP1C3T144C8 development board to realize a crossroads traffic lights control, including four traffic lights, and four 2-bit digital countdown device.

4-16译码器，用VHDL编写的，可以直接下载到可编程逻辑器件中(4-16 decoder, written with VHDL, can be directly downloaded to the programmable logic device)

数字计时器，使用VHDL语言编写，使用数码管显示，精确到ms-digital timer, the use of VHDL development, the use of digital control, the precision of the ms

vhdl经典源代码――ps2接口设计，入门者必须掌握-vhdl classical source code-- ps2 interface design, beginners must master

OFDM中的16QAM星座映射的实现实现详细代码(In OFDM 16QAM constellation mapping to achieve the realization detailed code)

说明：  功能是（用Verilog语言的，内有比较详细的注释）： （1）计数器的功能是从0到9999计数，并能以十进制数的形式在七段数码管上显示出来(包括七段数码管显示模块). （2）该计数器有一个1个nclr和一个adj_plus端，在控制信号的作用下（见下表），计数器具有复位、增或减计数、暂停的功能。编写以上的程序的完整模块. 计数器的功能表 nclr adj_minus 功 能 0 0 复位为0 0 1 递增计数 1 0 递减计数 1 1 暂停计数 (Function is (with Verilog language, the more detailed comments): (1) counter function is from 0 to 9999 counts, and are able to form a decimal number on the seven-segment LED display (including the seven-segment LED display module). (2) The counter has a one nclr and a adj_plus side, under the action of the control signal (see below), the counter has reset, increase or decrease of count pause function. Complete the preparation of the above program modules. Counter function menu nclr adj_minus reset 0 0 0 0 1 1 0 counts counting suspended Count 1 1)

verilog实现ALU的源代码，并提供了一个详细的测试平台！-achieve ALU Verilog source code, and provide a detailed test platform!

利用FPGA控制VGA显示器显示字符汉字的程序，里面有注释。(VGA display with FPGA control procedures Kanji characters, there are comments.)