avr下最小化的printf函数，可以输出八进制与十六进制数值。

对开放源码的嵌入式仿真环境SkyEye的综述。-right open source embedded simulation environment SkyEye reviewed.

三星44b0 LED测试程序，主要用来测试硬件功能。-Samsung 44b0 LED test procedure is mainly used to test the hardware functionality.

STM32平台下的MPU6000六轴驱动，SPI通讯接口。采用brust read，一次读取6轴数据和温度，减少读取时间

ucGUI的一些使用例子，包括基本2D绘图，为图显示，还有导航系统哦-ucGUI use some examples, including basic 2D drawings, to chart shows, oh navigation system

用IAR编写的，MSP430用按键开关控制LED，不可多得的学习程序-IAR prepared to use, MSP430 button switch control with LED, invaluable learning process

总的来说，在uClinux上的开发和标准Linux还是很类似的。通常可以按照下面的步骤去设计和调试： 建立基于以太网的开发环境； 如果所设计的程序和硬件的关联不大，那么一定要在标准Linux上先编译和调试通过。灵活地使用gcc和gdb将大大节省时间； 将x86上的GCC编译好的应用程序用交叉编译工具来编译；如果编译时发现错误，那么很可能存在以下问题： 交叉编译器或库文件的路径不正确；最彻底的解决办法是重新装一次编译器； 遇到库不支持的函数；此时需要自己把函数的实现做成另外一个库供应用程序使用。如果是uClinux本身不支持的调用，那么就需要改写代码了。-Overall, the uClinux on the development and standard Linux is still very similar. Usually can use the following steps to design and debug : Ethernet-based development environment; If the design of the procedure and not linked to the hardware, then it must be the first standard Linux compiler and debugging through. Flexibility in the use of gdb and gcc will greatly save time; X86 will be on the GCC-compiled application with cross-compiler tool to compile; If you compile time error is found, it was very likely that the following issues : cross-compilers or libraries are not the correct path; The most radical solution is a re-installed time compiler; encountered does not support functions; At this time the need to

一个不错的DSP5402的bootloader源代码,主要程序是用汇编来实现-a good DSP5402 Bootloader source code, is the procedure used to achieve compilation

微机原理及系统接口技术――8255开关的实现算法源程序。-Computer System Interface Technology-- 8255 switch algorithm source.

Insight of SONY VAIO notebook(VGN-U50).

msc1201 编程1-msc1201