df

STM8单片机的GPIO基本程序，使用标准库函数(The STM8 microcontroller GPIO basic program, using the standard library functions)

plc 的电梯控制程序，含有组态软件,控制算法。plc 采用三菱fx1n(plc elevator control program, containing configuration software)

无线传感器网络分簇路由协议中的LEACH的仿真，程序具有详细的备注，便于初学者学习。(Wireless sensor network clustering routing protocol LEACH simulation program has detailed notes, easy for beginners to learn.)

Seekers导引头模型仿真C++源码；内含Seeker仿真模块、导引头电机环节、导引头PID环节等。(Seekers seeker model simulation C++ source containing Seeker simulation module, motor aspects seeker seeker PID link and so on.)

LPC2103-IAR例程，NXPLPC2103 arm7处理器实验代码(LPC2103-IAR routines, NXPLPC2103 arm7 processor test code)

1.显示当前系统的时间。 2.网站计数器，要刷新就可以看到效果。(1 shows the current system time. 2 sites counter, to refresh you can see the effect.)

利用51单片机做电阻测量仪，实现按键设置阻值自动报警提示(The use of 51 single-chip resistance measuring instrument to achieve automatic alarm button to set the resistance)

基于单片机的出租车计价器，其中包括protues图和C++程序(Taxi meter, including protues map and C++ program)

说明：  双路输出控制器”具有信号输出时间设定、 输出信号占空比调整、 当前输出通道及时 间显示、系统工作参数存储、串口通讯及 LED 指示等功能。 “双路输出控制器”通过串口完 成信号输出时间设定功能；通过 EEPROM 完成系统工作参数存储功能；通过按键完成输出通 道切换、 输出信号占空比调整及停止信号输出功能； 系统硬件电路主要由 MCU 控制单元、独 立按键、 LCD 显示单元、 串口通讯单元、 EEPROM 数据存储单元和 LED 指示单元组成(Dual output controller has the signal output time setting, adjust the duty cycle of the output signal, the current output channel in time Between display, system operating parameters are stored, serial communications and LED indicator. Dual Output Controller through serial END A signal output time setting function complete system operating parameters via EEPROM memory function complete output pass through the key Channel switching, adjust the duty cycle of the output signal and the stop signal output function the system hardware circuit is mainly controlled by the MCU unit, alone Li buttons, LCD display unit, serial communication unit, EEPROM data storage unit and LED indication units)

w90p710的LCD显示图片的程序，已测试(w90p710 the LCD display pictures of the process, have been tested)