LPC2103-IAR

stm32f4xx包含启动文件（starup_stm32f4xx.s,system_stm32f4xx.h,system_stm32f4xx.c,system.h)和库函数(stm32f4xx intialize files and library)

16位的DALTC1865有详细的程序，数码管显示(16-bit DALTC1865 detailed procedures, digital display)

基于三星ARM7程序开发,最经典的程序设计.由BOOT程序导入工作程序.(Samsung ARM7-based program development, the most classic programming. By the BOOT program to import procedures.)

实现对ARM嵌入式运行bin文件的长度修改与后校验字添加(Implementation of embedded operation bin file length modification and after verification word)

这个是LPC1788开发板的测试用例 都已经试过可以编译通过(This is the LPC1788 development board test cases have been compiled through)

STM32开发手册，挺好用的，希望能够帮助你，还望多多交流，相互学习(STM32 development manual, very good use, hoping to help you, but also look more exchanges, learn each other)

通过ARM的MDIO接口对交换机芯片BCM53101的PYH寄存器读写以完成对光口和电口的配置。该c文件是自己做的装置上使用的，完全可以正常使用，大家可以参考获得些灵感。(PYH register configuration for swith BCM53101 )

ATMEGA8_ LTC2400 6位半表头程序 LTC2400最高测量电压为5.3V，超过5.3V或反接都会烧掉。 模拟部分供电最好经过7815稳压，最高输入电压不宜超过18V。 模拟电路与数字电路分开供电。 不要使用开关电源或PWM升压、降压电路供电 (ATMEGA8_ LTC2400 6 ½ -digit meter program LTC2400 highest measured voltage is 5.3V, 5.3V or reverse will be burned over. After 7815 some of the best analog power supply voltage, the maximum input voltage should not exceed 18V. Separate analog and digital circuit power supply. Do not use a switching power supply or PWM buck, boost circuitry)

stm32F103 利用fsmc接口驱动液晶屏显示BMP图片(stm32F103 show BMP picture)

说明：  USB接口的上位机程序，用VB开发，可以和 S3c44b0相连(Visual Basic source code, sample of connection between PC s USB and Samsung s RISC S3C44 series.)