shaderFrame

步进电机是将电脉冲信号转变为角位移或线位移的开环控制电机，是现代数字程序控制系统中的主要执行元件，应用极为广泛。。在非超载的情况下，电机的转速、停止的位置只取决于脉冲信号的频率和脉冲数，而不受负载变化的影响，当步进驱动器接收到一个脉冲信号，它就驱动步进电机按设定的方向转动一个固定的角度，称为“步距角”，它的旋转是以固定的角度一步一步运行的。可以通过控制脉冲个数来控制角位移量，从而达到准确定位的目的；同时可以通过控制脉冲频率来控制电机转动的速度和加速度，从而达到调速的目的。(Stepper motor is an open loop control motor which transforms electrical pulse signal into angular displacement or linear displacement. It is the main executive element in modern digital control system, and is widely applied. In the case of non overloaded, the motor speed and stop position depends only on the pulse frequency and pulse number, regardless of load changes, when the stepper driver receives a pulse signal, it drives stepper motor to set the direction of rotation of a fixed angle, called "step", it is the rotation of the fixed point of the operation step by step. We can control the angular displacement by controlling the number of pulses, so as to achieve the goal of accurate positioning. At the same time, we can control the speed and acceleration of motor rotation by controlling the pulse frequency, so as to achieve the purpose of speed regulation.)

ssd1289-3.2的基于STM32的测试程序。(ssd1289-3.2 testing procedures based on the STM32 )

这是一个用51单片机系统仿真ucosii工作的protues电路 本系统包括扩展64k RAM的单片机系统和杨屹移植到51单片机的ucosii 系统 使用方法： 1.安装Protues7.4版，然后用protues打开protues 8051 simulation 文件夹 中的extern ram.DSN 文件 2.打开extern ram.DSN 后，双击单片机在弹出的窗口中的Program File 选项 中选择yy.hex文件。 (yy.hex其实就是yy文件夹中keil文档编译出来的hex文 件，yy文件夹是杨屹的ucos51 系统，用keil 2 可以打开) 3.在Clock Frequency选项中输入22.184M(杨屹的ucos51 用的是22.184M hz的单片机频率) 4.双击VTERM串口调试显示屏，在Baud Rate 选项中选择19200的波特率 5.保存，点击运行就可以看到经典的hello world 了。 (1. Protues7.4 version installed, and then open the protues folder protues 8051 simulation The extern ram.DSN file 2. Open extern ram.DSN, double-click the pop-up window of SCM in the Program File option, select yy.hex file. (yy.hex actually yy folder keil out of the document compiled hex files, yy folder is Yang Yi s ucos51 system, using keil 2 Can open) 3. In the Clock Frequency option to enter 22.184M (Yang Yi of the ucos51 using a microcontroller 22.184M hz frequency) 4. Double-click VTERM serial debug display, in the Baud Rate select 19200 baud rate options 5. Save, click Run you can see the classic hello world)

单片机内刻录程序，包含C语言和汇编语言两个版本。实现7455C5与单片机的串口通信，信息传输。(Microcontroller burning program, contains two versions of the C and assembly language. 7455C5 microcontroller serial communication, information transfer.)

PSCAD做的风电变流器网侧变换器，7断式svpwm调制，运行良好。(PSCAD do wind power inverter side converter, 7 broken type SVPWM modulation, work well.)

使用MSP430操作12864显示屏，共显示四行。可显示中文汉字(Use MSP430 operation 12864 display four lines total. Can display Chinese characters)

通过protues仿真实现的51单片机红外线遥控发射和接收解码装置。(Simulation achieve through protues 51 microcontroller infrared remote control transmitter and receiver decoding device.)

控制蜂鸣器pic18单片机程序,测试通过，已批量生产。(Pic18 microcontroller program to control the buzzer)

屏幕输出(pingmushuchu)

上位机发送数据包，下位机实现简单数据接，然后可以存储到其他位置(PC to send data packets, lower machine simple data connection, which can then be stored in a different location)