ARM 的实例程序，在ADS下运行。运行buildall.bat生成这些例子的应用。有readme具体说明有关配置。...

small c for z80 从PART1到4-small c for Z80 to four from PART1

STM32F103的ucOS-II 移植好的工程。项目可以直接编译、调试，没有错误和警告，注释详尽。ST的Cortex-M3内核，在UCOS-II中建立两个任务，分别以1s和2s点亮熄灭两个LED。(The ucOS-II transplantation STM32F103 good works. Project can compile, debug, no errors and warnings, detailed notes. ST' s Cortex-M3 core, in UCOS-II in the establishment of two tasks, respectively, 1s and 2s lit off two LED.)

The embedded system UCOS II was implemented on a C51 MCU.

KEIL环境下的ARM程序，I2C通信。基于LPC214x系列-KEIL environment of the ARM program, I2C communications. Based LPC214x Series

压缩包中有基于ucos系统下的常用程序，有tim捕获，串口查询，串口中断，定时器中断，温度读取。(Compressed package based on common procedures under ucos system, there are tim capture, serial query, the serial port interrupt, timer interrupt, temperature reading.)

linux_source_0.11这是一个低版本的源代码，很研究linux内核的同志学习。-linux_source_0.11 This is a low version of the source code, is the study linux kernel learn from Comrade.

说明：  这是按照前面我发的从零开始学习ucosii手册，编写成功的模板。芯片是stm32f103c8t6，移植在f103芯片上，都是同理可得。记住虽然可以直接拿着用，但是要修改对应的IO口哦，程序效果是led小灯闪烁。（有一个问题我也不太清楚，理论上c8t6的启动文件应该是startup_stm32f10x_md.s，但是用它却不能成功。用startup_stm32f10x_hd.s却成功了。）(This is a successful template written in front of the uCOSII manual that I started from zero. The chip is stm32f103c8t6, and the transplant is on the F103 chip. Remember that although it can be used directly, but to modify the corresponding IO mouth Oh, the program effect is the LED light flicker. (there is one problem I'm not very clear about. In theory, c8t6's startup file should be startup_stm32f10x_md.s, but it can't be successful with it. It was successful with startup_stm32f10x_hd.s.))

uCOS-II for AT91M55800A完整实例-Complete example of uCOS-II for AT91M55800A.

ucos在三星s3c44b0上的ide程序-OUT Samsung s3c44b0 in the process ide

ucos 在avr单片机运行实例～～ 对于，学习ucos和单片机都很有用-A real example of uCOS running on AVR microcontroller, it is very helpful to learn uCOS and microcontroller.