可以提供一小部分的好东西是不容易的，我希望你会离开…

说明：  stm32f103芯片ucosii例程，经测试，可用(UCOSII routine of STM32F103 chip)

1.板上的8 个按键分别分别代表数字1-8，按下一个按键将结果通过串口发送到PC机上显示； 2.使用两个定时器模块，分别定时为1ms 和100ms 产生中断，使用它们分别 产生1s的定时时间，将时间分别显示到数码管上； 3.外接PS/2小键盘，将按键的值通过串口显示到PC机上。(A panel of eight key representing the number 1-8 press a key the results sent through the serial port on a PC display (2) use two timer modules, respectively, of 1ms and 100ms timer generates an interrupt, use them, respectively, Produce the timing of the 1s, the time display to the digital control External PS/2 keyboard, the key value of displayed through the serial port to a PC.)

该文件为uCOS-II实时嵌入式操作系统的详细使用教程，代码分析及源代码。教程中对uCOSII中代码各部分功能和模块分章列出，希望对使用和移植的朋友能够有所帮助。-This document gives uCOS-II real-time embedded operating system, the detailed use of tutorials, code analysis and source code. Tutorial on the uCOSII in various parts of the code features and module sub-chapters are listed in the hope that the use and transplantation of a friend can help.

这是用于STC（AT）89C51的操作系统ucOS-II，是我修改之后的，绝对可用(This is used for STC (AT) 89 C51 operating system ucOS-II, is my after modification, absolute can be used )

压缩包中有基于ucos系统下的常用程序，有tim捕获，串口查询，串口中断，定时器中断，温度读取。(Compressed package based on common procedures under ucos system, there are tim capture, serial query, the serial port interrupt, timer interrupt, temperature reading.)

51单片机UCOS系统移植，包括全部源码，以及自己写的部分代码，编译通过(The 51 single-chip UCOS system transplantation, to including the the the all source code, as well as to write their own of the part of the code, the compiler through)

基于ARM应用的源码，在英培特实验板上验证通过-ARM-based application source code, the tissue culture experiments in the United Kingdom through board certification

在vc开发环境下实现uc/os+uc/gui+uc/fs，有助于初学者试验仿真学习参考-Development environment in the vc realize uc/os+ Uc/gui+ Uc/fs, the pilot will help beginners learn the reference simulation

移植到MCS51的uCOS_II的串口程序。-transplanted to the MCS51 uCOS_II Serial procedures.

基于飞利浦ARM7 LPC214X的u/COS+GUI -Based on the ARM7 LPC214X Philips u/COS+ GUI