avr入门用的 有protus仿真图

利用带AD的单片机开发的单片机程序，能够进行ad，程序调试通过，结果发送到电脑上，通过串口-AD use with single-chip microcontroller development process, to carry out ad, program debugging through, the result is sent to the computer through the serial port

单片机C语言的笔记。记录了单片机C的各个变量，函数计相应的例子-Single-chip C-notes. Singlechip C were recorded in all variables, function of the corresponding example

这是我用汇编语言编写的计时器程序，通过计算机发命令开始倒计时，其中也有其他功能，但主要是倒计时，比较好用，这是个小程序，穿上来了表心意-This is the language I used compilation prepared by the timer procedures, through the computer started the countdown orders, which also has other functions, but the countdown is more convenient, it is a small program to put on the table liking

在ICD做lcd显示时钟演示程序，汇编源代码， 学用液晶的可以参考参考。-done in ICD LCD display clock demonstration program, the compilation of source code, study LCD can refer to the reference.

包含protue 7.2 仿真文件及汇编语言源代码。主要是一个4X4的键盘以及一个LCD显示显示屏。键盘输入显示在LCD上。-Simulation protue 7.2 contains documents and assembly language source code. 4X4 is primarily a keyboard and a LCD display screen. Keyboard displayed on the LCD on.

8051设计延时程序说明。-8051 design description of the procedures.

32位arm9微处理器S3C2410的中断程序测试源代码-32-bit ARM9 microprocessor S3C2410 interruption procedures to test the source code

51单片机对 siemens4442卡的底层驱动程序 把.rar改成.C即可-51 Singlechip siemens4442 card on the bottom of the driver. Rar changed. C can be

c8051f单片机支持软件读写flash操作例程与相关资料，使得能过无需外接eeprom等存储器，就能保存非易失性数据（掉电不丢失的数据）。-c8051f MCU support software routines to read and write flash operation with relevant information, It would make no such external eeprom memory, we will be able to preserve nonvolatile data (power-fail without loss of data).

Verilog实现的DDS正弦信号发生器和测频测相模块，DDS模块可产生两路频率和相位差均可预置调整的值正弦波，频率范围为20Hz-5MHz，相位范围为0°-359°，测量的数据通过引脚传输给单片机，单片机进行计算和显示。-Verilog realize the DDS sine wave signal generator and frequency measurement module test phase, DDS module can generate both frequency and phase difference can be preset to adjust the value of sine wave, frequency range of 20Hz-5MHz, phase range of 0 °-359 ° , measurement data and transmit them to the single-chip pin, single-chip microcomputer to calculate and display.