优龙2410板子的BIOS代码，程序清晰明朗，容易移植到类似的开发板上，十分值得推荐。...

MEGA16的小车沿黑线行驶程序，能够控制程控小车沿规定路线自行行使。-MEGA16 the black car along the lane, it will be programmed control along the trolley line provides free exercise.

ds18b20的程序，经过测试可以使用分享一下-DS18B20 procedures tested can use to share

此源码是采用CS5460A＋W78E58的多功能交流数字仪表的代码，有功率表、电压表、电流表、功率因数表和相位角表功能。-this source is used CS5460A+ W78E58 exchange digital multifunction instrument code, a power meter, voltmeter, ammeter, power factor and phase angle Table Table functions.

对液晶屏的显示驱动，运用中断对显示实时控制 -On the LCD screen of the display driver using interrupt the display of real-time control

A/D转换器ADC0832驱动程序，该程序属于A/D的基础程序，可以调用该函数来实现A/D转换-A/D converter ADC0832-driven program, which belongs to A/D based program, you can call this function to achieve the A/D converter

这是一个红外报警系统，该系统通过555调制红个发光管，发出38KHZ的红外信号，对面使用一个红外接收头接收信号用来检测是否有人通过，如果有，则声光报警，-This is an infrared alarm system, which modulator 555 through a red light-emitting tube, issued 38KHZ IR signal, opposite to the first use of an infrared receiver to receive signals to detect whether or not it was passed, if so, make a sound light alarm,

CAN总线与51单片机的接口原理图，使用的是sja1000和tja1040(philips).还包括了具体的文档资料和c语言控制代码(附加了LCD代码和LCD接口以及电源变换原理图).搞CAN总线一步到位.-CAN Bus and 51 microcontroller interface schematics, using the sja1000 and tja1040 (Philips). Also include the specific information and documentation control code language c (Additional code of LCD and LCD interfaces, and power transformation diagram). CAN engage in one go.

HX8310-A 128RGB x 160 dot, 262,144 color TFT controller driver 初始化代码

用于接收红外摇控器和异步串行的8051单片机程序-for receiving infrared remote control and asynchronous serial 8051 of the procedures

陵阳单片机的语音编程的一个例子程序-Lingyang SCM voice an example of the programming process