液晶显示器的接口

c语言写的用于单片机mps430的底层通信协议，包含了bch编解码，交织编解码，和crc校验。经过简单的修改即可用于其他的单片机。-write for the MCU mps430 underlying communication protocol includes the BCH encoding and decoding, codecs are intertwined, and crc check. After a simple modifications can be used in other SCM.

这是一个源代码,USB的挺不错的,希望大家下载下来看看.,一-This is a source code, the USB quite good, we hope to see down the download. , A

该压缩包为ARM S3C44B0的源代码，含有5个程序。分别为按键控制LED,PWM脉冲宽度调制,RTC实时时钟，UART串口通信，DMA直接内存存取等5个实验的源代码。代码以C语言为主，辅以部分ARM汇编指令。该实验开发平台为S3C44B0板，开发工具为ADS1.2.-The package for the ARM S3C44B0 compression source code, which contains five procedures. Were keys to control LED, PWM pulse width modulation, RTC real time clock, UART serial communication, DMA direct memory access, such as five experiments the source code. Code to C language, supplemented by some ARM compilation directives. The experimental development platform for S3C44B0 boards, development tools for ADS1.2.

s3c44b0的IIC总线设计.包括读写数据-s3c44b0 design of the IIC bus. including reading and writing data

unlinux在ARM上的移植-unlinux on ARM transplant

单片机串口发数，通过串口调试助手可以显示，COM口为实际使用的，波特率设置为：57600

使用STM32f407移植FATFS文件系统，最新版本R0.10。底层采用SDIO四线驱动，DMA传输数据，速度可以达到1M/s。需要注意的是，发送和接收的数据缓冲区的地址需要是四字节对齐的，也就是说它的起始地址需要是4的倍数，否则会出现读写错误的现象。

基于CPLD的二进制码转换为二十进制（BCD）码的电路[1].pdf-based CPLD binary code into two decimal (BCD) code circuit [1]. Pdf

基于80c51的双DS18B20测温代码-80c51-based dual-DS18B20 temperature code

播放声音的嵌入式程序，ADS调试器，ICE仿真器环境。-Play a sound of embedded programs, ADS debugger, ICE emulator environment.