基于TI公司DSP2812 CAN 通讯C源码

这是周立功公司的ZLG GUI源代码，你只要简单的实现几个底层的LCD基本命令和读写操作就可以移植到你的51,AVR,ARM7,ARM9上，GUI类似微软窗口，基于消息的，内附文档说明，开发简单。-This is the week Ligong ZLG GUI s source code, you need to do is simple to achieve a few basic commands the bottom of the LCD and to read and write operation can be transplanted to your 51, AVR, ARM7, ARM9 on, GUI similar to Microsoft Windows, based on the information attached document explains the development of simple.

我在使用陈明计先生写的small RTOS和51单片机做过几个小项目，起初都很好，开发变的容易了，程序变的容易修改。后来随着任务个数的增多，RAM很快就不够用了。51系列的芯片内部RAM普遍都是256个,很难找出1024个字节RAM或更多，而价格又合适的。记得上一次我没有办法被迫使用了64K flash内部带768字节的XRAM的51芯片，而我根本用不到那么多flash。-I use Mr. Chen Mingji written small RTOS and 51 MCU done several small projects at first were very good to develop easy to change the program become easier to modify. Subsequently, the increase in the number of tasks, RAM is not fast enough. 51 series of chip RAM are generally 256, it is difficult to find 1024 bytes of RAM or more, while prices will be appropriate. I remember the last time I had no way forced to use a 64K flash with 768 bytes of internal XRAM of 51 chips, and I will never use that much flash.

本程序是智能小车开发环境中的dll文件可以在Visual 平台下开发-this procedure is smart car development environment of dll file can be developed under Visual Platform

基于LPC2414的TC77温度芯片驱动程序（带protues仿真），用液晶屏显示温度（附带液晶驱动）。

基于LPC21xx的PCF8563（I2C RTC）实时时钟程序，按键与菜单方式驱动，可根据注释修改。-Based on LPC21xx the PCF8563 (I2C RTC) Real Time Clock procedures, button and menu-driven approach can be modified in accordance with the Notes.

友善之臂sbc2410x开发板wince系统下Samsung3.5寸屏用BSP源代码。-Friendliness sbc2410x arm development board wince system Samsung3.5-inch screen with BSP source code.

s3c4510B开发板使用JTAG接口对Flash编程的VC6• 0源代码-s3c4510B development board JTAG interface to the use of Flash programming VC6# 8226; Source code 0

Boot code for ARM-720T, ARM-920T, XScale, SA1100 and EPXA-Boot code for the ARM-720T ARM-920T, XScale, SA1100 and EPXA

最新三星6410 Flash Jtag烧录软件，非常难得。-Latest Flash burning software, very rare.

1.此代码在SDT2.51下调试通过，可以在我的板子ARM DEVELOP BOARD V1.0上面跑！其上电以后LED会闪烁一下，接着串口0会输出一些系统信息 可以通过串口终端与系统交互，可以测试320X240 STN LCD,包括图形显示函数，ascii字符显示函数。-1. This code debugging under the SDT2.51 passed, in my plank ARM DEVELOP BOARD V1.0 above run! After its power LED flashes that went 0 serial output will be some system information through serial terminal and system interaction, can test 320x240 STN LCD, including graphics function, ascii character display function.