使用AIN0和AIN1测量两路直流电压，并将结果通过UART0想PC机发送。...

m48配置鞍山路附近按时间反垃圾gfjaslf；来收集垃圾伽师-Anshan Road, near the M48 configuration time anti-gfjaslf to collect garbage Jiashi

这是ARM9 linux 2.4.X 字符驱动开发例子，想学LINXUX 驱动开发不妨下载参考，测试OK-This is the ARM9 linux 2.4.X character-driven development example, want to learn LINXUX-driven development may wish to download the reference, test OK

SMALL RTOS是为小ram系统单片机编写的,目前仅在51系列单片机上成功运行,还没有在其它单片机上移植(目前我仅有51和avr的开发系统).在小ram系统单片机如51系列上运行tcp/ip 协议栈是不太现实的.一般tcp/ip 协议栈需要在32位单片机上运行,在8位机上运行太勉强(51是8位机),除非您只运行ip协议.建议使用ucos/ii操作系统或是嵌入式linux,并选用arm或龙珠系列单片机-SMALL RTOS for small microcontrollers ram system, written in 51 series of microcontrollers currently only on the successful operation, no other MCU on the transplant (currently I am only 51 and avr development system). In the small ram System-on- machines such as the 51 series of films running on tcp/ip protocol stack is not very realistic. General tcp/ip protocol stack need to run 32-bit microcontrollers in the 8-bit machine running Taimian Jiang (51 is the 8-bit machine), unless you run only ip protocol is suggested. ucos/ii operating system or embedded linux, and use arm or Pearl Series MCU ..

基于LPC2468的嵌入式系统开发板，可做项目是参考。-LPC2468-based Embedded System development board, to do the project reference.

应用背景 这个试用与CAN通讯的主机程序，主机会发送0x1111给从机器，从机接受到信号后发送0x2222给主机，主机将收到的内容通过USART6显示在屏幕上。程序使用CoIDE编程，总线的设置等均在主函数中，方便移植。同时强烈推荐CoIDE 开源而且很适合初学者。 关键技术 CAN主机的各项配置，GPIO，USART的配置，特别适合初学者学习。清晰的编程思路。如果你是刚接触CAN总线的话一定会给你帮助的。从机只是主函数和主机不同。请大家自行修改一下。

TI DSPF2812外部中断源码,-TI DSPF2812 external interrupt source,

ARM7 S3C44B0X 电机转动控制实验代码-ARM7 S3C44B0X motor rotation control experiment code

protel yuanjianku zlg de lpc 2200 xilie

三星ARM-ADS编译平台上的ARM S3C2440 ADC示例

44BO 的UCGUI包，未经测试 大家自己使用-44BO UCGUI未 约