ADC 2通道显示GLCD使用STM32F103（firebull / firedragon103）

该程序是MPC860的SCC2用作HDLC模式的驱动程序。供大家参考。-that the procedure was MPC860 SCC2 HDLC mode for the driver. For your reference.

ARM7的UART驱动程序 可以自由配置缓存大小 驱动函数集 以及接口简单 很适合初学者提高自己的驱动开发能力的参考程序 产品级别的代码 注释很详尽 但需要自己提供IRQ部分的初始化部分程序 本作者不提供 程序为原创-ARM7-UART driver can configure the cache size of the drive free set of functions and simple interface is suitable for beginners to improve their ability to drive the development of reference procedures for product-level code is very detailed notes, but some need to provide their own IRQ initialization part of the process of this author does not provide procedures for the original

使用51单片机STC12C5A60S2，在Keil C下变成，编码盘采集会转速后，单片机根据设定转速与实际转速差值，通过PID算法后得到一个PWM值，给定驱动模块实现数字PID调速。

TMS320C6713固化程序到外部FLASH的flashburn程序及相关软件，以及FBTC的相关数据手册

S3C44B0x中RTC的使用方法 寄存器的使用很有借鉴意义 -S3C44B0X in the RTC registers to use the use of referential significance to

ARM开发的指导用书，对你有帮助-ARM with the guidance, to help you

ARM EP9315 的原理开发图，有20多页的原理图纸-ARM EP9301 the principle development plan, more than 20 pages of drawings Principle

AT91RM9200的RTC测试程序，本程序以成功在我的AT91RM9200试验板上跑通-AT91RM9200 the RTC test procedures, the procedures are in place to succeed in my test board AT91RM9200 running pass

计算机体系结构中,关于DLXS的模拟程序.在vc6.0下编译通过.-Computer Architecture, on the DLXS the simulation program. Under the vc6.0 compile.

一些测试代码，可供参考。DMA、flash、IIC、lcd、mmu、Nand、RTC等。