任老师的UCOS

ucos-ii中发送一个互斥信号mutex源码-ucos-ii Send a mutex mutex signal source

基于ucos的可移植的键盘程序。包含了四种键盘状态，按下，弹起，按下未弹起，重复。软件去抖的功能。-Based on the ucos procedures portable keyboard. Status includes four keyboard, press, up, did not press up, repeat. Software functions to tremble.

ucos_ii 在microblaze平台上的移植-ucos_ii mainly due to the platform migration

ucos2.52在msp430上移植-ucos2.52 transplant on the Controller

基于ucgui3.90 建立了点选框，可以选择7档CAN通信速率，建立一个文本编辑框作为接收CAN通信报文，建立了5个按钮，4个按钮作为测试报文数据发送，1个按钮作为清除接收文本区。(Establish a point-based ucgui3.90 box, you can select 7 files CAN communication rate, create a text edit box as a receiving CAN communication message, the establishment of five buttons, 4 buttons as a test packet data transmission, a button as Clear receive text area.)

基于uC/OS-II操作系统，LPC2292硬件平台，实现与PC的TCP协议通信的程序源码-Based on uC/OS-II operating system, LPC2292 hardware platform, with the PC

mcf522xx EV板的驱动程序源码，可以直接使用。该驱动本人测试过。-mcf522xx EV Board driver source code can be used directly. The driver I tested.

三星公司的ＡＲＭ７芯片S3C44B0X的ｕＣＯＳＩＩ操作系统源码(Samsung's chip ARM7 S3C44B0X uCOSII source operating system)

ucgui下的GIS引擎简陋版，采用ucgui为绘图GUI,演示GPS坐标与屏幕坐标变换，实现轨迹回放功能，放大缩小功能，不能演示，但也具有，没完善-GIS engine under ucgui simple version, using ucgui for mapping GUI, presentation screen GPS coordinates and coordinate transformation, achieve trajectory playback, zoom function, not presentation, but also not perfect

uCOSⅡ――RTOS嵌入式实时操作系统开发-uCOS Ⅱ- RTOS for embedded real-time operating system development