基于80C51单片机源码公开的操作系统1.20.2 版RTOSsmall_rtos1.20.2

lcd19264 用C51控制12864显示汉字 -C51 control lcd19264 with 12864 display Chinese characters

液晶显示模块MGLS20040的C51驱动程序-LCD module MGLS20040 the C51 Driver

ok very good os

此程序可以实现两个单片机之间的相互通信；串口采用方式1工作，10位异步接受和发送，波特率可变，由定时器1控制；且含有校验-This program can be achieved between the two microcontrollers communicate with each other serial port mode 1 using the work of 10-bit asynchronous receive and send, variable baud rate, from Timer 1 control and contains a checksum

增量式PIDc 语言下实现的例程.rar-failed to translate

实现多个16*16LED屏的多个字符显示,显示方式有整行上移、帘入帘出、左移、右移-Achieve more than 16* 16LED screen shows a number of characters, displayed on the entire line has moved a curtain to curtain, the left, shifted to right

仿真步骤如下： 1、把3个帖子的内容分别保存为51t9py.c,51t9py_indexa.h,5py_mb.h，放在同一目录下，将51t9py.c加入工程编译 2、由于Keil的模拟串口是单字节显示，汉字显示为乱码，所以要加挂RICHWIN或RichView这种会重新刷新显示的中文平台，或手工刷新屏幕，所以请先到 http://www.pchome.net/dl/chinese.htm 下载RichView，安装运行 3、在Keil环境下可以直接按“Ctrl＋F5”键仿真，按“F5”全速运行，切换到在串口依次输入: // 64*.6 426***.5 98*.7 936.3 586.1 4826*.1 9464*.7 64*.6试试:-) 4、按键对应(根据我自己的手机设置的,全部在PC的小键盘操作)： -simulation steps are as follows : 1 and 3 respectively, the content of messages posted on the preservation of 51t9py.c, 51t9py_indexa.h, 5py_mb.h, on the same directory, will join the project 51t9py.c compiler 2, Keil is the simulation of single-byte Serial show , the Chinese showed gibberish, so need to add or RichView RICHWIN this show will re-set the Chinese platform, or manual refresh screen, so please download RichView http://www.pchome.net/dl/chinese.htm to install three operations in Central Keil Habitat can be directly "Ctrl+ F5" key simulation, according to the "F5" running full-speed, switched to the ser

用最新的32位微控制写的原装LCD＋LED程序-With the latest 32-bit micro-control to write the original LCD LED process

本原码功能是单片机接收和发送串口字符的例子，请参考-primitive code SCM function is to receive and send serial characters examples, please reference

请将下载的2个插件内容拷贝到uVision 的安装目录下的 KeilC51BIN 中 2. 修改 Tool.ini, 此文件位于 uVision 的安装目录 keil 下. 请将下面的内容 添加到 [C51] 部分的后面. AGSI1=ledkey.dll ("ledkey") AGSI2=simboard.dll ("simboard") 3. 重启uVsion. 进入Debug 模式, 打开菜单Peripheral, 发现增加了2项 分别是键盘LED仿真板，51实验仿真板。-Please download the contents of two plug-ins are copied to the installation directory uVision under KeilC51BIN 2. Modify Tool.ini, this file is located in the installation directory uVision under keil. Please Add the following line to [C51] part of the back. AGSI1 = ledkey.dll (ledkey) AGSI2 = simboard.dll (simboard) 3. Reset uVsion. entered the Debug mode, open the menu Peripheral, found an increase of 2 are keyboard LED emulation board, emulation board 51 experiments.