三星SDRAM的verilog模型的完整源码

用verilogHDL写的一个risc处理器-VerilogHDL write with a RISC processor

pxa270对应的uboot程序，能够引导pxa270开发板启动-uboot corresponding pxa270 procedures, be able to guide the development board to start pxa270

基于arm核的RTOS-based nuclear arm of RTOS

S3C2410中bluetooth驱动源码,在ADS1.2下编译工程通过,附文档.-S3C2410 in the bluetooth driver source code, compile the project in under ADS1.2 passed, the document attached.

基于ARM9-AT91RM9200的开发板BasicBootsdram的系列调试程序，文件里有程序的详细注释.-based on ARM9-AT91RM9200 development of the plate BasicBootsdram Series debugging procedures, the documents in accordance with the procedures detailed notes.

EasyARM2131开发板源码之一-----------2．GPIO输出实验－单路LED控制-EasyARM2131 one source development board----------- 2. GPIO output experiment- one-way LED control

基于ARM7的嵌入式微处理器LPC2131对LED进行控制，即GPIO的使用-based on the ARM7 LPC2131 right embedded microprocessor control LED, that the use GPIO

ＳＡＭＳＵＮＧ２４４０　ＢＯＯＴ　ＣＯＤＥ，ＳＵＰＰＯＲＴ　ＳＥＲＩＡＬ　ＤＯＷＮＬＯＡＤ．ＣＯＭＰＩＬＥＤ　ＵＮＤＥＲ　ＡＸＤ．-SAMSUNG2440 BOOT CODE, SUPPORT SERIAL DOWNLOAD. COMPILED UNDER AXD.

MIB的参考代码,有IDB_GET,IDB_SET,和IDB_NVM_SET的具体写法和说明-MIB reference code, IDB_GET, IDB_SET, and the specific wording IDB_NVM_SET and notes

用来给ARM烧写程序的程序,可以把编译链接好的机器码烧写到ARM里面(三星的S3C44B0x),其它的ARm处理器也可以参考.-used to the procedure for burning, can build good links to the binary burning inside ARM (Samsung S3C44B0x), and others ARm processor reference.