基于LPC2119和uC/OS

周立功 GUI在ucosii上的应用，内含源码及说明文档-weeks ucosii meritorious GUI in the application includes source code and documentation

CF卡的制作。将嵌入式开发板的启动，放置到CF卡中，让处理器从CF卡启动。-How to make a CF card for automatic booting.

本测试程序是在44B0板子附带的LCD程序例子修改而来-This test procedure is included in the 44B0 board examples of changes from the LCD program

FreeRTOS + Lwip For MCB23-FreeRTOS+ Lwip For MCB2300

这是一个关于mips处理器的内存管理的c代码，希望对你有用-mips mmu

LPC213X下的 图形界面（嵌入式GUI)，运行在UC/COS系统下。-LPC213X under the graphical interface (Embedded GUI) running on UC/COS systems.

This test code use PWM to control LED flashing, however, users can use PWM to do other things with the PWM initialization code-AT91SAM7S test code for PWM development under IAR platform

PIC+C语言编写的经典源程序。学习pic的好东西－不可多得。-PIC+ C classic source language. Pic study of the good things- hard to come by.

使用键盘上的上、下、左、右四个按键，可以分别控制led1,2,3,4,每个LED 对应的Port 请参考“实验平台介绍”说明文档。要求按下 上面提到的四个按键中间的一个按键后，该按键对应的led 被点亮，持续1 秒钟以后led 熄 灭。-Use the keyboard on the upper and lower, left, and right buttons, can control led1, 2,3,4, each LED corresponding to the Port, please refer to " experiment on" documentation. Requirements of the four above-mentioned press the middle button of a button, the button that corresponds to being light led, continuous 1 second later led out.

客车仪表符号片驱动程序。开发环境ICCAVR，单片机ATMEGA8-Instrumentation symbols-chip bus driver. Development environment ICCAVR, Singlechip ATMEGA8