UCOS systems using the MIPS platform source, very good information source can be...

嵌入式开发板测试程序，基础 1、设置串口工具 2、DNW的设置方法 3、程序烧写的步骤 4、生成自己的bin文件的方法 出厂程序演示 1、pwm蜂鸣器 2、RTC实时时钟 3、ADC实验 4、按键功能 5、触摸屏测试 6、LCD显示实验  对于出厂代码的修改和分析  （基本还是属于非常基础的基础，手把手教你操作） 第一节 ADS入门级介绍 1、外部函数声明

4510 bootloader 源代码即说明文档 -4510 Bootloader clear that the source code files

flash烧写器，支持WRIGGLER和SDT的JTAG(运行时可自动选择)-burning flash devices, and support WRIGGLER SDT JTAG (runtime can automatically select)

LPC2214的IAP应用编程，这里指通过在应用编程可以升级代码-LPC2214 IAP application programming, in this case through the application programming code can be upgraded

STM32的简要介绍，包括应用领域及发展前景。-STM32 a brief description, including the application fields and development prospects.

TMS320F2812开关电源中 实现A/D转换-TMS320F2812 switching power supply to implement A/D conversion

InterFlashDriver关于P30的驱动-InterFlashDriver on P30 driver

ARM9的ZLG7290的模块 在液晶上显示数字，可以用按键调整-ARM9-ZLG7290 of the liquid crystal display module in the figure, you can adjust with keys

his project was built and tested with WinAVR-20060125. Make sure the MCU target define in the Makefiles corresponds to the AVR you are using!! To build the code, just install WinAVR and run "make" from the console in echomaster and echoslave subdirs. "make program" will program the device if you have a AVRISP attached. Remember to set the AVR device to at least 8MHz. The AVR may use the programmable clock from MC1319x, just remember to check if the MC1319x and SPI communication is working FIRST! Otherwise you wont get any clock signal to the AVR and then you can t program it or reset the fuses! The MC1319x has default clock output of 32kHz so you will have to set your programmer to a very low frequency (

自己买的arms3c44b0开发板附带的demo程序，可直接在ADS上跑，可供朋友们借鉴-Arms3c44b0 bought their own development board attached demo program can be run directly in the ADS for friends learn from