uC_OS在ARM7上的移植

uC_OS-II在Keil C上的移植代码，注意此代码使用与KeilV6.20及其以上版本。-Keil C portal of uC/OS-II source code. Note: this code is for Keil V6.20 or later version.

基于三星４４Ｂ０芯片的移植操作系统，供参考学习-44B0-based Samsung chip transplant system for reference learning

说明：  UC 主要用于homepage恢复，便于一键操作，提供便利(UC is mainly used for home page recovery, easy to operate with one button and convenient to operate.)

uC/OS 使用SDT 开发工具包,可以参考一下-uC/OS use SDT Development Kit, a reference

ARM串口驱动 ARM芯片为LM6938,系统为ucos-ARM chips ARM serial driver for the LM6938, the system for uCOS

ARM 的实例程序，在ADS下运行。运行buildall.bat生成这些例子的应用。有readme具体说明有关配置。-ARM sample program, running under the ADS. Running these examples buildall.bat generation applications. A readme specify the configuration.

ucOS + ucGUI 人机界面 源码 加入触摸屏校准功能。 >> 校准后触摸屏参数保存在STM32芯片自身的Flash中。 >> 当第一次启动程序或者全部擦除芯片后第一次启动将会执行校准。 >> 也可以在设置功能中选择“触摸屏校准”手动执行校准，前提是当前触屏参数和真实值相差不大，可以进入到触摸屏校准选项(ucOS+ ucGUI HMI experiment source Code)

UCOS在S3C2410上针对的键盘应用-UCOS in S3C2410 application against keyboard

说明：  这是按照前面我发的从零开始学习ucosii手册，编写成功的模板。芯片是stm32f103c8t6，移植在f103芯片上，都是同理可得。记住虽然可以直接拿着用，但是要修改对应的IO口哦，程序效果是led小灯闪烁。（有一个问题我也不太清楚，理论上c8t6的启动文件应该是startup_stm32f10x_md.s，但是用它却不能成功。用startup_stm32f10x_hd.s却成功了。）(This is a successful template written in front of the uCOSII manual that I started from zero. The chip is stm32f103c8t6, and the transplant is on the F103 chip. Remember that although it can be used directly, but to modify the corresponding IO mouth Oh, the program effect is the LED light flicker. (there is one problem I'm not very clear about. In theory, c8t6's startup file should be startup_stm32f10x_md.s, but it can't be successful with it. It was successful with startup_stm32f10x_hd.s.))

在ucos-ii下用LPC2290的spi端口驱动M65的液晶屏，可以任意开辟区域显示-Ucos-ii in the LPC2290 using the spi port driver M65 LCD screen, can open up the region show