TI-SIMPLE-SWITCHER

说明：  STM32F429开发板 编写的2FSK调制解调代码(2FSK Modem Code Written by STM32F429 Development Board)

利用Arduino实现读取MPU6050的DMP四元数(Arduino MCU reads MPU6050 use a DMP quaternion)

STM32 USART IAP升级，包含IAP程序、APP程序(STM32 USART IAP upgrades, including the IAP program, APP program)

Termometr read pc com post atmega8 usart

本程序的功能是在TI的32位单片机LM3S9D96官方开发板上，基于IAR软件平台的，在触屏上显示一个动态的正弦波的C程序。用的是官方的开发板，液晶屏也是官方的。本程序是自己原创。程序非常规范，有详尽英语代码注释。 本程序是该单片机的一个高级液晶显示应用。(The function of the program is a dynamic sine wave C program in TI' s 32 the microcontroller LM3S9D96 official development board, based on the the IAR software platform, touch screen display. Official development board, the LCD screen is also an official. This program is original. The program is very standardized, detailed English code comments. This program is an advanced LCD microcontroller applications.)

说明：  双路输出控制器”具有信号输出时间设定、 输出信号占空比调整、 当前输出通道及时 间显示、系统工作参数存储、串口通讯及 LED 指示等功能。 “双路输出控制器”通过串口完 成信号输出时间设定功能；通过 EEPROM 完成系统工作参数存储功能；通过按键完成输出通 道切换、 输出信号占空比调整及停止信号输出功能； 系统硬件电路主要由 MCU 控制单元、独 立按键、 LCD 显示单元、 串口通讯单元、 EEPROM 数据存储单元和 LED 指示单元组成(Dual output controller has the signal output time setting, adjust the duty cycle of the output signal, the current output channel in time Between display, system operating parameters are stored, serial communications and LED indicator. Dual Output Controller through serial END A signal output time setting function complete system operating parameters via EEPROM memory function complete output pass through the key Channel switching, adjust the duty cycle of the output signal and the stop signal output function the system hardware circuit is mainly controlled by the MCU unit, alone Li buttons, LCD display unit, serial communication unit, EEPROM data storage unit and LED indication units)

利用stm32的adc1，实现规则转换，检测通道pa6和pa7的电压值，并把他们的值放在数组中。串口显示数据方便调试。(Use stm32 the adc1, implement rules conversion, detection channel pa6 and pa7 voltage value, and put their values ​ ​ in an array. Serial display data to facilitate debugging.)

实时时钟 利用内部的晶振实现较为精确地时间控制 功能齐全可以秒表计时(a clock)

汇编编写的8086的程序，做的是汽车测速报警系统，带有自动控速功能(Compilation of the 8086 procedures, the car speed alarm system, with automatic control speed function)

说明：  使用stm32f407zgt6的tim14定时器输出pwm波(Output PWM wave with tim14 timer of stm32f407zgt6)