FENGMINGQI

0.96寸OLED资料，原理图，器件手册 例程(0.96 inch OLED data, schematic diagram, device manual routine)

STM32F10X ADC定时器出发方式，STM32例程包之一(STM32F10X ADC start the timer mode, STM32 routine one package)

说明：  ADI测试代码，ADI官方开发板测试demo分享(ADI ADSP21479 POST and the demo)

基于STM32F407 实现USB UVC摄像头主机功能功能(Implementation of USB UVC camera host function based on STM32F407)

Simplicity Studio下的EFM8SB1例程(One Program of EFM8SB under Simplicity Studio)

说明：  ADI公司的AD4111是具有±10V和0 mA至20 mA输入和明线检测功能的低功耗 24 位 Σ-Δ ADC,集成了模拟前端(AFE),还集成主要模拟和数字的信号调理区快,为每个模拟输入通路配置成八种单独建立图,最大通路扫描速率6.2 kSPS(161 μs),嵌入的2.5V低漂移(5 ppm/℃)能隙基准电压降低了外接元件数量,单电源5V或3.3V工作,工作温度?40℃ 到 +105℃,主要用在过程控制PLC和DCS模块.本文介绍了AD4111主要特性,功能框图以及评估板EVAL-AD4111SDZ主要特性,框图,电路图,材料清单和PCB设计图.(The AD4111 is a low power, low noise, 24-bit, sigma-deltaanalog-to-digital converter (ADC) that integrates an analog front end (AFE) for fully differential or single-ended, high impedancebipolar,10 V voltage inputs, and 0 mA to 20 mA current inputs. The AD4111 also integrates key analog and digital signalconditioning blocks to configure eight individual setups for each analog input channel in use. The AD4111 features amaximum channel scan rate of 6.2 kSPS for fullysettled data.)

说明：  利用STM32F103内置ADC实现电压电流采集(Acquisition of Voltage and Current Using STM32F103 Built-in ADC)

使用基于STM32f103驱动SSD1306的OLED（0.96寸）演示动画驱动，包含整个工程文件(Based STM32f103 drive SSD1306 of OLED (0.96 inch) driven animation, contains the entire project file)

基于STM32的2M U盘源码，对STM32的开发很有用(2M U disk on STM32 )

说明：  s3c2440的led测试程序，使用ADS编译，亲自测试，可用。(s3c2440 the led test program, compiled using the ADS and personally tested and available.)