STC89C58RD+系列内部eeprom放数据-STC89C58RD+ Series of internal EEPROM data released

12864液晶显示，很值得学习，仅供参考-12864 liquid crystal display, it is worth learning, for reference only

自己写的关于车台控制面板的演示程序，有兴趣，可以查看-Write their own control panel on the car of Taiwan demo program, are interested in, you can view

系统can地址为550,用于can系统测试,应用T0定时器每隔1s向can总线发送一组数据:数据长度为8个字节, 首字节为05H,第二个字节为累加变量,每秒钟数值增加1,-system can address 550 for the test system can, Application T0 1s to every timer can send a bus of data : data length of 8 bytes the first byte of 05H, the second byte of cumulative variable, an increase in value per second.

pic单片机实现的TCP/IP协议-pic MCU TCP/IP protocol

悠景2.23oled演示代码，可以在DEMO板显示-Univision 2.23oled demo code, you can board at the DEMO show

全量程交直流无档电压表的设计 这里只给出了系统设计的方案 带有程序流程图-Wide-range AC-DC voltage meter free stall design here only gives the system design program with a program flow chart

单片机控制步进电机加减速C语言源程序，通过不断改变定时器的定时初值来提高频率。-Single-chip stepper motor control acceleration and deceleration C language source program, by changing the timing timer to improve the frequency of the initial value.

请将下载的2个插件内容拷贝到uVision 的安装目录下的 KeilC51BIN 中 2. 修改 Tool.ini, 此文件位于 uVision 的安装目录 keil 下. 请将下面的内容 添加到 [C51] 部分的后面. AGSI1=ledkey.dll ("ledkey") AGSI2=simboard.dll ("simboard") 3. 重启uVsion. 进入Debug 模式, 打开菜单Peripheral, 发现增加了2项 分别是键盘LED仿真板，51实验仿真板。-Please download the contents of two plug-ins are copied to the installation directory uVision under KeilC51BIN 2. Modify Tool.ini, this file is located in the installation directory uVision under keil. Please Add the following line to [C51] part of the back. AGSI1 = ledkey.dll (ledkey) AGSI2 = simboard.dll (simboard) 3. Reset uVsion. entered the Debug mode, open the menu Peripheral, found an increase of 2 are keyboard LED emulation board, emulation board 51 experiments.

点阵屏幕的显示出程序 点阵屏幕的显示出程序点阵屏幕的显示出程序-LED DISPLAY LED DISPLAY LED DISPLAY