microcontroller for ARM的JTAG。

IAR工程模板初探,包含工程设置等常数的说明以及使用方法.可与Protues中的LPC系列ARM实现仿真(已测试).绝对原创.-Project templates of IAR, including settings such as project description, as well as constant use. Protues in with LPC series ARM achieve simulation (tested). Absolute originality.

周立功ZLG_LPC213X的全套资料，这个是其中的SPI-Week Ligong ZLG_LPC213X a complete set of information, this is one of the SPI

#include //#include //#include "pic16f877.h" //#include "pic18f4539.h" //#include "pic18f452.h" //htc.h //========================================================== void delay(unsigned int value) {     while(value>0) value--;  } //========================================================== //================================================ //#pragma config FOSC = HS, WDTE = OFF, CP = OFF, PWRTE = OFF //__CONFIG(FOSC_HS & WDTE_OFF & DEBUG_OFF ); //__CONFIG(HS & WDTE_OFF & DEBUG_OFF ); #pragma config   OSC = HS,WDT =OFF #pragma config PWRT = OFF //#pragma config  OSC = HSPLL #pragma config  WDT = OFF #pragma config    LVP = OFF void main(void) { //CLEARBIT(TRISD,0xff); //SETBIT(PORTD,0xff); TRISB=0x00

基于ARM9的NAND FLASH（large page）的驱动，包括读写和擦除（在数据区可剩余区），读取ID号等主要功能。-ARM9-based NAND FLASH (large page) of the drive, including reading and writing and erasing (in the data area will be the remaining area), read the ID number and other major functions.

通常我们需要将板上的Flash芯片拆下，用Flash编程器烧写固件程序；这个程序可以通过CCS运行Emu模式直接将程序烧写到flash芯片中。-Usually we need to board the Flash chip removed, Programming with Flash burning device firmware procedures; This procedure can be run through the CCS model Emu directly to the process of burning flash chip.

utu2440板子上移植u/COS-II操作系统,包括有LCD驱动。-u/COS-II for utu2440 board.

网上搜集的整套s3c2440中文手册。是目前最完整的了。介绍了s3c2440详细技术资料。-Internet to collect the package of s3c2440 Chinese manual. Is the most complete of the. Introduced s3c2440 detailed technical information.

这是Wrigger的原版原理图-Wrigger This is the original schematic

本文详细的介绍了基于LPC2000系列处理器的系统的初始化过程，并结合具体代码（在附带的程序中）对重映射作了细致的阐述，这些对于正确的理解和开发基于ARM的嵌入式系统具有重要的意义。-This paper introduces a system based on the LPC2000 family of processors the initialization process, combined with a specific code (in the attached program) made a detailed mapping of the re-elaboration of these for a correct understanding and development of ARM-based embedded system has an important significance.

bios for arm