原创！！！ 刚刚完成的ucos2 2.76 for 瑞萨m16/60

基于 Philips 公司的 ARM-7 使用之 uC/OS-II 作业系统,此例程是移植于 LPC-2138 上的应用,不同于一般的 Porting 其最主要是加入了支援 OS_View 观察器功能,于 IAR EWARM V4.41A 工程编译,而 uC/OS 版本为 2.83-Based on the Philips company

一个AT91SAM7X256 USART驱动实验，硬件环境为at91sam7x-ek开发板，开发环境为iar。-An experimental AT91SAM7X256 USART driver, hardware environment at91sam7x-ek development board, development environment for iar.

这是ucos在Freescale9s12XS128上移植成功并测试成功的代码(This is ucos in Freescale9s12XS128 successfully transplanted and successfully tested on the code)

flash down程序，将bootloader烧写入nor flash，详细源代码-flash down procedure will be written into the bootloader burned nor flash, detailed source code

ucgui下的GIS引擎简陋版，采用ucgui为绘图GUI,演示GPS坐标与屏幕坐标变换，实现轨迹回放功能，放大缩小功能，不能演示，但也具有，没完善-GIS engine under ucgui simple version, using ucgui for mapping GUI, presentation screen GPS coordinates and coordinate transformation, achieve trajectory playback, zoom function, not presentation, but also not perfect

基於microchip PIC micro controller 的uCOS-based microchip PIC micro controller of uCOS

UCGUI源代码 windows可用的 UCGUI源代码 windows可用的-UCGUI windows source code available UCGUI windows source code available

ucgui移植到s3c44b0 UCOS_II : UCOS_II代码，2.76版 Src : 主程序代码 Inc : 主程序的头文件 gui ：gui代码 Myusos.mcp : ADS1.2工程文件-ucgui transplanted to s3c44b0 UCOS_II: UCOS_II code, 2.76 version of Src: the main program code Inc: main header file of the gui: gui code Myusos.mcp: ADS1.2 engineering documents

此为针对凌阳SPCE061A板进行的uCOS2.00版本的移植，编译通过且运行正常，自带一个LED灯的实验，可以直接看到效果。-This is the board for Sunplus SPCE061A conducted uCOS2.00 version of transplantation, the compiler and run through the normal LED lamp comes with an experiment, you can directly see the effect.

uc/osii在ARM7上的移植（移植到S3C44B0）-uc/osii ARM7 transplant (transplant S3C44B0)