DM9000 ARM的UCOS

零死角玩转stm32-系统篇1、uCOS-II 移植与深入实战指南(Zero dead Fun stm32-System Part 1, uCOS-II transplantation and in-depth practical guide)

在勤研的KY44B0X上移植好的UCOS276源码-ground in the research on transplantation KY44B0X good source UCOS276

c++1

ucos中文书籍 对于初学者会有一定的帮助-Description of ucos for the first learner

移植ucos2的心得，在移植的时候看一下很有指导意义-its write by someone have port ucos2 to arm7 read it and is usful

说明：  基于uCOS-III+STemWin+FatFS+ARM_DSP_Lib的示波器源码。(Oscilloscope source code based on uCOS-III+STemWin+FatFS+ARM_DSP_Lib.)

UCOS/II for ICCAVR - The version of UCOS/II is 2.04 - the original port was done by Ole Saether for the IAR compiler. Jens E. Holtegaard ported one version using ICCAVR. Joerg Meyer did another port (using Jens port as a start?). This is basically Joerg s port plus a little bit of changes and documentation by me. - YOU MUST DOWNLOAD THE MAIN PART OF THE UCOS/II FROM THE UCOS/II WEBSITE http://www.ucos-ii.com . The supplied project file assumes the portable source is in the ..source directory. - Joerg has written couple document showing the stack frames etc. but it is in German :-) They are included in this directory. - The Timer2 overflow interrupt is used for Timer Tick. If you want to change that, modify os_cpu_c.c and os_cpu_a.s - I have tested this using ATMega103 with and without external RAM using AVR Studio simulator. See test1.c test program. Both Code Compressed (PRO) and STD versions have been tested. -UCOS/II for ICCA

ucos for arm 1176 porting

ucosii 移植到ARM 9 2440环境 基本已经完成 没有最终试验 恐有差错 -ucosii ported to ARM 9 2440 environment has basically been completed there is no final test may have errors

可直接用于Atmel AT91SAM7X256_EK板的简单Web服务器程序， AT91SAM7X256（MAC)+DM9161AE（PHY），Web程序中设定的IP地址192.168.131.200,MAC地址 00-30-6C－00-00-02详见emac_lib.h与ethernetif.c,可在IE浏览器中输入查看，注：MDIX跳线未短接时，PC与EK板均需要通过UTP网线接至交换机，MDIX短接时可用网线直连PC。-Can be used directly Atmel AT91SAM7X256_EK board a simple Web server program, AT91SAM7X256 (MAC)+ DM9161AE (PHY), Web procedure set IP address of 192.168.131.200, MAC address 00-30-6C-00-00-02 see emac_lib.h and ethernetif.c, in IE browser, enter the view, note: MDIX when the jumper is not shorted, PC and EK boards come through UTP cable connected to the switch, MDIX cable shorted available when Direct Connect PC.