avr ucos 不错的学习代码 AVR Studio WINAVR

基于 Luminary Micro 公司的 Cortex-M3 (ARM)内核使用之 uC/OS-II 作业系统,此例程是移植于 LM3S310 上的应用,于 Keil MDK 工程编译,而 uC/OS 版本为 2.83(Based on the Luminary Micro Cortex-M3 (ARM) core use uC/OS-II operating system, this routine is transplanted into the application of the LM3S310, Keil MDK works in the compiler, and uC/OS version 2.83)

一个简单的8位cpu的功能实现,从外部导入机器码,模拟cpu的运行-a simple 8 cpu to achieve the functions, from the outside into binary, simulating the operation of cpu

ucos 中文手册,非常完善的 ucos 的源码注解。-ucos English manual, a very sound ucos source notes.

用于TMS320LF2407的uCOSèII（内核源代码和可移植文档）

uCOS-II在 S3C44B0x 系统上的移置-uCOS-II S3C44B0x system in the home shift

我自己移植的ucos-iiv2.90 绝对原创！ 能在c8051f上运行(I transplanted ucos-iiv2.90)

无需要外扩RAM的RTOS-no RAM expansion needs of the RTOS

使用UC/OS II实现系统省电模式，通过软件实现，非常精妙。(use UC/OS II system to achieve energy saving mode, through software, very carefully.)

在ARM7和UC/OSII的平台上实现了GPS自动报站的功能,涉及GPS模块LEA_4S的驱动,位置速寻算法,语音芯片ISD4004的录放音驱动,LED页面管理等等.从启动代码到操作系统的移植以及到业务代码都有,是一个完整的项目代码.只要有相应的硬件平台就可以跑起来-In the ARM7 and the UC/OSII platform realize the GPS auto-stop function, involving GPS module LEA_4S driver, location-speed search algorithms, voice chip ISD4004 playback of audio drivers, LED page management. From the startup code to the operating system transplant as well as to the operational code has, is a complete code of the project. As long as have the corresponding hardware platform can run up

此例程运行于内RAM > 1024 Byte的51内核的单片机即可。 比 如 ： SST89E564RD ,STC89C516RD 等 移植ucosii，本例程一共创建了3个任务，任务一开led1,任务二开LED2，任务3关闭led1和led2，并且运行到相应的任务，串口会打印出来，提示当前系统运行的状态。(This routine runs on a single chip computer with 51 cores of RAM > 1024 Byte. For example, SST89E564RD, STC89C516RD and so on For uCOSII, 3 tasks are created in this routine, the task is LED1, task two opens LED2, task 3 closes LED1 and LED2, and runs to the corresponding task, the serial port will be printed out to prompt the state of the current system running. This routine runs on a single chip computer with 51 cores of RAM > 1024 Byte. For example, SST89E564RD, STC89C516RD and so on For uCOSII, 3 tasks are created in this routine, the task is LED1, task two opens LED2, task 3 closes LED1 and LED2, and runs to the corresponding task, the serial port will be printed out to prompt the state of the current system running.)