TLC2543多通道串行A/O转换器及其c51语言单片机应用程序

MSP430框架程序。适用于MSP430F449，其他型号需要适当改变。 不使用的中断函数保留或者删除都可以，但保留时应确保不要打开不需要的中断。 保留中断函数，编译器将会为BSL密码填充所有的字节。-MSP430 framework procedures. Applicable to MSP430F449, other models need to be properly changed. Do not use the interrupt function can be retained or deleted, but should be retained to ensure that do not open unwanted interruption. Retain the interrupt function, the compiler will fill all of the BSL-byte password.

自己写的测试串口的小工具，巨好用！他可以完成十六进制和字符同时显示-himself wrote the serial testing of small tools, giant handy! He can be completed hexadecimal characters and shows

Keil下的拼音输入法源码，很经典的好东东哦！-Keil under the Pinyin input source, the classic Eastern Oh good!

Msp430-JTAG调试下载器， -Download Msp430-JTAG debugger, and

C8051FXXXX的一个开发例程，对于接触C8051F12X的开发者比较有用，可以下载看一下-C8051FXXXX development of a routine, contact C8051F12X developers more useful, can be downloaded to look at

使用89S52芯片来驱动1602液晶显示,用KEILC51编译,可靠,并实践过.-err

用SmartGen生成一个256*8的大小同步FIFO，并通过串口发送数据初始化FIFO。然后，再通过串口返回到上位机的串口调试程序显示，确认数据是否正确。-SmartGen generated with a size of 256* 8 Synchronous FIFO, and sending data through the serial port to initialize FIFO. And then back through the serial port to the PC serial port debugger display to confirm the data is correct.

μC／OS―ⅡV：2.80 对 ATMega256 单片机的移植程序代码。- C/OS- II V : 2.80 pairs ATMega256 SCM transplant procedure code.

用Keil　C51写的步进电机驱动程序。-Keil C51 was made with the stepper motor driver.

这是一个比较好的可调整时钟程序，大家来-This is a good procedure to adjust the clock, we come and see us!