在at91sam7s256跑ucosii,建立了10个任务。

基于LPC2119的CAN驱动及例子 循环发送实例程序 简单的CAN中继器实例，用到验收过滤寄存器 CAN和RS232透明转发器 基于uCOSII的CAN和RS232透明转发器 等(based LPC2119 CAN drive and examples of this cycle of a simple example of CAN Repeater is cases, Register acceptance filter used CAN and RS232 transparent uCOSII transponders on the CAN and RS23 two transponders and other transparent)

LPC2148微处理器ARM7开发板带驱动编程模板(LPC2148 microprocessor ARM7 development board tape driver programming template)

将ucos-II 移植到 KeilC51 的小模式下。由于小模式运行速度比大模式运行速度快很多，这将有利于提高系统 的速度。-Ucos-II will be transplanted to the small mode KeilC51. Due to the small mode large mode faster than a lot of speed, which will help improve system speed.

ucos 2.86是目前最高版本，里面包含了可以在IAR移植的atmel128 的源码。很干净，非常不挫-ucos 2.86 is the highest version, which contains the IAR can atmel128 transplant source. Very clean, very down

51单片机UCOS系统移植，包括全部源码，以及自己写的部分代码，编译通过(The 51 single-chip UCOS system transplantation, to including the the the all source code, as well as to write their own of the part of the code, the compiler through)

使用GPS驱动中间件,先初始化GPS,发送相关命令,等待接收地理的数据,若接收到数据,可从液晶屏中显示.-The use of GPS-driven middleware, first initialize the GPS, send the relevant command, waiting to receive the geographical data, if the received data can be displayed from the LCD screen.

uCOS-II在51上的移植源码V1.1-uCOS-II at 51 on the transplant source V1.1

STM32F103的ucOS-II 移植好的工程。项目可以直接编译、调试，没有错误和警告，注释详尽。ST的Cortex-M3内核，在UCOS-II中建立两个任务，分别以1s和2s点亮熄灭两个LED。(The ucOS-II transplantation STM32F103 good works. Project can compile, debug, no errors and warnings, detailed notes. ST' s Cortex-M3 core, in UCOS-II in the establishment of two tasks, respectively, 1s and 2s lit off two LED.)

keil c open

该源码能够帮助初学者输入理解ARM语言的奥秘，熟悉ADS环境。成为ARM搞手-The input source can help beginners to understand the mysteries of ARM language, familiar with the ADS environment. Become engaged in hand-ARM