LM3S_uCOS2 for 485总线源代码

可直接用于Atmel AT91SAM7X256_EK板的简单Web服务器程序， AT91SAM7X256（MAC)+DM9161AE（PHY），Web程序中设定的IP地址192.168.131.200,MAC地址 00-30-6C－00-00-02详见emac_lib.h与ethernetif.c,可在IE浏览器中输入查看，注：MDIX跳线未短接时，PC与EK板均需要通过UTP网线接至交换机，MDIX短接时可用网线直连PC。-Can be used directly Atmel AT91SAM7X256_EK board a simple Web server program, AT91SAM7X256 (MAC)+ DM9161AE (PHY), Web procedure set IP address of 192.168.131.200, MAC address 00-30-6C-00-00-02 see emac_lib.h and ethernetif.c, in IE browser, enter the view, note: MDIX when the jumper is not shorted, PC and EK boards come through UTP cable connected to the switch, MDIX cable shorted available when Direct Connect PC.

ucos在z80上的移植-CENTER Z80 in the transplant

嵌入式操作系统 arm-ucos2041 -embeded operation system ucos in philips arm chip plc2104.

基于ucos和lwip实现网口和串口的模块实现，包括了软件架构和编程思路-LwIP uCOS and based on the realization of network and serial port of the module, including the software architecture and programming ideas

将ucos-ii移植到vc++6.0上，包含ucos-ii源码和移植源代码(The ucos-ii transplanted to vc++ 6.0, contains ucos-ii Source and portable source code)

基于ARM7的ucosii程序，移植好的(ARM7-based ucosii program, good transplant)

ucos2源代码，嵌入式系统中使用最为广泛的操作系统-ucos2 source code, embedded systems the most widely used operating system

这是uOsII在VC++下的模拟源代码，我编译通过-This is uOsII in VC++ source code under the simulation, I have compiled through the

ucos在LPC2200中的移植-CENTER LPC2200 in the transplant

ucgui源码3.32，一个比较新的版本。-Source code of uC-GUI version 3.32. This is a somewhat newer one.