78EXXPCB11 winbond51单片机源码一堆

用AVR单片机实现对时钟芯片DS1302的spi驱动，来读取和写入时间-AVR Microcontroller with the right of the spi clock chip DS1302 drive to read and write times

蜂鸣器响 改变蜂鸣器的频率，通过改变延时时间 蜂鸣器的时间要是是靠延时来完成的-Buzzer buzzer ring to change the frequency by changing the delay time if the buzzer is the time to be completed by the time delay

AT89C51SND1C是AT89C51核心的处理器，包含一个MP3解码器，完全兼容8051的Keil C51编译环境，适合8051使用者的MP3解码应用。本代码在基本代码基础上增加了LCD驱动部分，需要比较多的RAM和ROM资源，大家按照自己的系统资源情况，选择基本版本代码还是扩展LCD的代码。-AT89C51SND1C is AT89C51 core processors, includes an MP3 decoder, 8051 is fully compatible with the Keil C51 compiler environment 8051 suitable for user

avr单片机开发EEPROM读写实验源程序-Single-chip EEPROM read and write avr developed experimental source

这是JHD19264液晶显示器的驱动源程序，单片机采用的是AT89C52.-LCD driver source, the microcontroller is AT89C52.

这是我画的步进电机通用的驱动板，当然只是应用到初学者，版胡德不是很好，希望大家多多指教。-This is my painting of the stepper motor drive GM board, of course, only applied to the beginner, not a very good version of Ehud, I hope everyone exhibitions.

这是一个输出字节和汉字的程序...可以用的我已调试过的-output byte characters and procedures can be used to ... I have tuned in

基于51的12864串联代码,方便大家使用12864，并且可以节约端口啊-51 12864-based serial code, and to facilitate the use of 12864 people, and can save the port ah

控制电机运动的G代码程序,如果对G代码不清楚,请先看懂G代码,然后再看本程序.-Control motor movement, G code program, if the G code is not clear, please understand G code, and then look at the procedures.

这是一个有实用价值的制作。可记录 0-17米每秒的风速。可靠性高、架设容易、适用范围广。可存放30.46天的数据，并可保存11个月。也就是说，在12个月内去抄一下数据即可。抄数据的方式是通过手提电脑的串行口。供电方式为太阳能电池及普通电池。-This is a practical value has produced. Record of 0-17 meters per second wind. High reliability, easy to set up, the application scope. 30.46 days to deposit the data, as well as preservation of 11 months. In other words, in the 12 months to what data can be copied. Copied data is through the serial port of portable computers. Power supply for solar cells and normal cells.