Example demonstrates a simple use of the clipboard.

-嵌入式系统的C语言设计。

应用背景 VB写的控制程序，通过PC端上位机控制，在电路板上实现相应的演示效果。  VB write control procedures, through the PC side of the upper computer control, on the circuit board to achieve the corresponding demonstration effect. 关键技术首先 烧写程序到单片机   晶振 11.0592MHZ连接好串口线打开上位机软件 选择好COM端口  设置波特率为9600 First of all burn to write programs to chip crystal 11.0592Mhz serial line connection open PC software select the COM port to set the baud rate of 9600

在这里我写了要找到之间无数的输入数量最多的程序。我只是写并易于理解。还有在我的程序不存在困难。但逻辑是太重要了。

在sopc 当中创建硬件电路，在nios对i2c器件进行读写-Were created in SOPC hardware circuit, in the Nios of i2c devices to read and write

PIC18F25K22 微控制器的代码的项目。这段代码从 GSM900 发送一个消息给世界上的任何手机号码

三片CD4094级联驱动LED,Proteus 仿真实现-3 CD4094 cascade-driven LED, Proteus Simulation

学习8051，TI传感器的示例代码。主要是压力传感器的使用及函数的调用，实例指导开发的过程，共享，方便大家交流与学习。

鼎力推荐！本程序是基于嵌入式LUNUX系统开发的源程序代码，所有程序采用C语言进行编写，是学习、开发嵌入式LUNUX系统不可多得的参考资料。-strongly recommended! This procedure is based on the embedded system development LUNUX the source code, all the procedures used for the preparation of C language, learning, the development of embedded systems LUNUX rare reference.

MSP430与液晶显示器的串行接口方案-MSP430 and LCD serial interface program

一些常用串口的例子，希望对大家有帮助，里面有好几个源代码。-Examples of some commonly used serial port, in the hope that everyone has to help, there are several source code.