本源码是关于１６０２液晶模块的驱动，开发工具是CodeWarrior for ARM Developer Suite即ADS...

关于用三星的s3c2410微处理器对k9s1208nand flash芯片写的驱动程序.-On with Samsung

周立功的GUI源代码，有详细的注释，简单易懂，适合刚开发GUI的朋友们-Week Ligong the GUI source code, has detailed notes, easy-to-read, suitable for newly developed GUI

LCD 的C语言驱动程序，非常实用！ 可以-The C language LCD drivers, very useful! Can

基于lpc2148的lcd1602驱动程序，附带了一段led小程序

Samsung 7" 800x480 LCD

本示例描述如何使用 ADC3 和 DMA 传输不断 转换后的数据从 ADC3 到内存。 ADC3 配置为连续转换 channel7。 每次转换结束时的 DMA 传输，在循环模式中， 转换后的数据，ADC3 博士从注册到 ADC3ConvertedValue 变量。 在此示例中，系统时钟是 144 兆赫，APB2 = 72 兆赫和 ADC 时钟 = APB2/2。 由于 ADC3 时钟是 36 兆赫和采样时间设置为 3 个周期，转换 12 位数据的时间是 12 个周期，所以总转换时间是 (12 + 3） / 36 = 0.41us(2.4Msps)。

汽车行业专用通讯，或是工业控制上应用，可靠性是can bus 的最大的优点。但CNA BUS 的通讯协议比较烦琐，本人也是刚刚才调通这个程序。-Automotive industry-specific communications, or industrial control applications, can bus reliability is the biggest advantage. However, CNA BUS protocol relatively cumbersome, and I was just transferred pass this procedure.

基于LPC21xx的PCF8563（I2C RTC）实时时钟程序，按键与菜单方式驱动，可根据注释修改。-Based on LPC21xx the PCF8563 (I2C RTC) Real Time Clock procedures, button and menu-driven approach can be modified in accordance with the Notes.

进行arm－linux嵌入式系统开发时，需要将文件烧写到flash上，在网上可以找到win下的烧写程序，但多数情况下开发环境应该是在linux下，烧写程序时切换到win下很不方便，使用该程序可以在linux下直接对flash进行烧写 该程序运行后将一个小的for arm的c程序通过串口传送到arm开发板上，使用该小程序与主机端通信，将主机传送信息烧写到flash上- Carries on when arm- linux inserts the type system development, needs the document fever to write on flash, is on-line may find under win the fever to write the procedure, but in the most situations the development environment should be under linux, the fever writes when the procedure cuts under win not to be very convenient, uses this procedure to be allowed directly to carry on the fever under linux after flash to write this procedure movement to transmit orally a small for arm c procedure through the string delivers on the arm development board, uses this script and the main engine end correspondence, writes the main engine pass-along message pam fever on flash

此为基于ARM的LCD液晶显示器的程序,采用C语言编写,产生正弦曲线-This is based on the ARM-LCD liquid crystal display procedures, the use of C language, resulting in sinusoid