chamber magicARM2410 use of WinCE5.0

串口数据与文件传输程序，开发环境为ads1.2 和arm2440-Serial data and file transfer process, development environment for ads1.2 and arm2440

nuclues 内核源代码已经在arm7-9 上作了移植

这是三星公司的arm7 s3c44b0x芯片的所有外设中断程序，都是用标准c语言编写的-This is Samsung"s chip ARM7 s3c44b0x all peripherals interruption procedures, standards are used to prepare the language c

本论文研究的课题是:ARM7处理器以及µ c/os-II操作系统,通过做实验,了解三星公司的S3C44BOX芯片的内部结构,工作原理以及其扩展的外围设备.熟悉基于µ c/os-II扩展的嵌入式系统的启动和应用程序的结构.掌握将µ c/os-II移植到ARM7处理器的基本方法,同时在µ c/os-II的基础上开发最基本的嵌入式系统。本文还给出了在开发的时候要注意的一些关键的问题。-this thesis research topic is : ARM7 processor and micro c/os- II operating system, as an experiment to understand the S3C44BOX Samsung chip"s internal structure and working principle and its expansion peripherals. Based on familiar with the micro c/os- II expansion of the embedded the launch systems and applications to the structure. master of micro c/os- II transplanted to the basic ARM7 processor, while the micro c/os- II on the basis of the development of basic embedded system. The paper also presents the development of the attention to some of the key issues.

基于MIPS处理器，嵌入式u-boot范例程序。-MIPS-based processor, embedded example u-boot procedure.

硬件系统模块包括超声波收发模块、LED显示模块、声光报警模块、STC89C52单片机模块。软件主程序流程图包括主程序流程图，定时中断子程序流程图，外部中断子程序流程图。如果距离小于一定数值，则会进行蜂鸣器报警，同时每个方向对应一个LED灯，报警时对应的LED会亮。采用两个测距模块，更加提高了倒车时的安全性，降低了事故的发生率。

应用背景ADI的DDS芯片AD9834，可以进行扫频，点频程序，实现频率的输出，可以修改后，运用到DSP/ARM等嵌入式芯片中。关键技术兼具点频模式和频率扫描模式;上位机选择工作方式;输入数值，单位：Hz;单片机串口工作方式1，波特率9600

三星arm9(s3c2410)开发板的原理图-Samsung arm9 (s3c2410) development board schematics

TI OMAP5910(1510)的最简单测试程序,用于 硬件最初的调试,简要文档含环境配置-TI OMAP5910 (1510), the most simple test procedure for the initial hardware debugging, summary documents containing environment configuration

PID自动调节直流电机的速度。认为规定直流转多少转，通过PID算法自动控制稳定在规定的转速内！-PID automatic adjustment of the speed of DC motor. DC to consider the number of provisions to, through the PID algorithm for automatic control of speed and stability within the required!