UDP实现嵌入式原程序

基于STM32F107的串口转以太网的例程,可以直接应用于实际项目中,采用LWIP实现

51单片机+收音模块！ 实验过的，一定OK-51 MCU+ Radio Module! Experiment before, definitely OK

自己在16实验板上实验成功的几个16实验程序非常好的-Their board in 16 experiments conducted successful experiments in a very good number of 16 experimental procedure

自已写的一个嵌入式实时多任务抢占式操作系统。花了几个礼拜，基本实现，暂时只能在MC68K上跑。可作参考。-own writing an embedded real-time preemptive multitasking operating system. Spend a few weeks, basically, the only temporarily MC68K run on. Reference can be made.

S3C44B0X上的IDE接口在uClinux上的驱动移植来自网上的资料，大家分享！-S3C44B0X the IDE interface in the driver uClinux transplantation information from the Internet, to share with you!

minigui listview 源代码，主要是ubuntu下的minigui关于列表的源代码。-minigui listview source code, mainly minigui under ubuntu source code on the list.

MGLS-240128TA液晶点阵显示驱动程序-MGLS- 240128TA dot matrix LCD display driver

SAM9261 BasicMMU Example code with ADS1.2 (163 kB) The goal of this project is to show how to use a PC100 SDRAM and the MMU to perform a rating with a 100MHz Bus Clock. The rating is based on Dhrystone 2.1. It shows the rate when I+D Caches are disabled or enabled, with or without MMU and I Cache is disable or enabled, with or without MMU. -SAM9261 BasicMMU Example code with ADS1.2 (163 kB) The goal of this project is to show how to use a PC100 SDRAM and the MMU to perform a rating w praxiology a 100MHz Bus Clock. The rating is based on Dhr ystone 2.1. It shows the rate when I Caches are d D. isabled or enabled, with or without MMU and I Cache is disable or enab led, with or without MMU.

UCGUI开发很好的例程,有用的学习资料-UCGUI develop good routines, learning useful information

此程序是为51开发的数控电源所写，精度较高，扩展性好-This procedure is developed for the 51 written by NC power, higher accuracy, better scalability