s3c2440 启动源代码，包含USB下载烧写，nandflsh分区，平台配置等功能

ADC转换器10位AVR-VOLTIMETER使用显示及定时器

液晶模块7920的测试程序，根据本程序可是方便的修改出7920系列芯片的驱动程序！-LCD Module 7920 testing procedures, but the procedures to facilitate the change from the 7920 series chip driver!

AT24CXX 芯片驱动程序-AT24CXX chip Driver

在ICCAVR平台上开发完成 主要是ATMEGA640/1280/2560的应用示例.(示例为电导测试仪) 主要包括了模拟采样,LCD级联菜单,串口通信等内容. -The ICCAVR platform is developed primarily ATMEGA640/1280/2560 of application examples. (Example for the conductivity tester) includes a simulation sample, LCD cascading menu, serial communications and so on.

嵌入式linux在arm板上的移植-Embedded Linux board in the arm transplant

请认真阅读您的文件包然后写出其具体功能尽量不要让站长把时间都花费在为您修正说明上.-Deinitializes the GPIOx peripheral registers to their default reset values.

在S3C44B0上实现的键盘和LED驱动程序，其关键是使用了系统定时器来提高效率。此代码依赖于硬件的GPIO接口，但只需按照实际稍微改动即可。-S3C44B0 in achieving the keyboard and LED driver, The key is to use a timer system to improve efficiency. This code depends on the hardware GPIO interface, but only in accordance with the actual changes will be slight.

如果想自制一个自己的BOOTLOADER，那么就可以参照这里在ADS下的工程文件。只需稍加修改就可以变为自己的BOOTLOADER了.-If you want to made an own BOOTLOADER, then it can refer to here under the ADS project file. Just a little modification can be turned into its own the BootLoader.

beep use keil to program this code.

基于msp430f169和3.2寸彩屏ssd1289的贪吃蛇和俄罗斯方块,“锦电杯”电子设计大赛车载预警防撞系统，附带的两个游戏，通过手机蓝牙控制。或者用电脑串口也可以。。。。。