<电力拖动自动控制系统―运动控制系统>多媒体课件运用计算机多媒体工具，忠实体现电机控制精髓,为学习和理解电机控制理论提供帮助。...

此源代码为UC/OS-II移植到51单片机的源代码.包括OS_CPU.H,OS_CPU_C.C,OS_CPU_A.S三个主要文件-this source code for the UC/OS-II transplants to 51 SCM source code. Including OS_CPU.H, OS_CPU_C.C, OS_CPU_A.S three key documents

这是我用C语言写的一个数字钟，他可以实现多种闹钟和秒表功能-This is because I use C language written in a digital clock, he can achieve a variety of alarm and stopwatch functions, etc.

液晶显示的完整程序，是你能很好的借鉴lcd的编程思想。-LCD complete procedures, is that you can draw very good lcd programming ideas.

MSP430x13x, MSP430F14x, MSP430F15x, MSP430F16x 系列的汇编语言范例-MSP430x13x, MSP430F14x, MSP430F15x, MSP430F16x series of assembly language examples

12232液晶模块的应用，该模块采用ST7920液晶控制芯片，编译菜用WinAVR2005.-12232 Application of LCD module, the module used ST7920 LCD controller chip, the compiler vegetable WinAVR2005.

MCS-51单片机有5个中断源，其中两个是由-INT0、-INT1引脚输入的外部中断源；另外三个是内部中断源即由T0、T1的溢出引起中断和串行口发送完一个字节或接收到一个字节数据引起中断。触发外部中断有两种方式，即下降沿引起中断或低电平引起中断。当编程TCON中的ITi（i=0、1）为1时，则引起触发的方式为边沿触发方式，反之(ITi=0)为低电平触发方式。每个中断源的中断请求能否得到响应要受两级“开关”的控制，即一个总“开关”-MCS-51 single-chip has five interrupt sources, two of which are by-INT0,-INT1 pin input external interrupt source the other three internal interrupt sources from the T0, T1 overflow caused by the disruption and serial port sending or receiving end of a byte to a byte of data caused by interruption. Triggered external interrupt has two modes, namely, falling edge or low-level disruption caused disruption caused. When programming TCON in ITi (i = 0,1) for the 1:00 has been the subject of a way to trigger the way to the edge of the trigger, on the contrary (ITi = 0) for low-level trigger mode. Each interrupt source interrupt request can be subject to levels in response to

单片机密码-24c01-12864-4x4按键扫描 初始密码是123456,按#确认 进入后,按*修改密码-Singlechip password-24c01-12864-4x4 keypad scan the initial password is 123456, by# Confirm enter, press* Change Password

iar编译器调试msp430单片机c程序详细教程-iar compiler debugging MCU Controller c procedures detailed guidance

isd1420语音芯片源程序用KEI UVISION打开-isd1420 voice chip source with open KEI UVISION

这是一个实现利用gsm模块通信的visual basic 源程序-This is a system to use the gsm module communications, visual basic source code