在skyeye软件下ucos

学习UCOS的必备资料,大家可以下载了哦。如果用于商业 请遵重知识产权保护条例-english

ucos操作系统的LPC2131调试通过的SPI显示-uCOS LPC2131 debugging the operating system through the SPI showed

1.板上的8 个按键分别分别代表数字1-8，按下一个按键将结果通过串口发送到PC机上显示； 2.使用两个定时器模块，分别定时为1ms 和100ms 产生中断，使用它们分别 产生1s的定时时间，将时间分别显示到数码管上； 3.外接PS/2小键盘，将按键的值通过串口显示到PC机上。(A panel of eight key representing the number 1-8 press a key the results sent through the serial port on a PC display (2) use two timer modules, respectively, of 1ms and 100ms timer generates an interrupt, use them, respectively, Produce the timing of the 1s, the time display to the digital control External PS/2 keyboard, the key value of displayed through the serial port to a PC.)

基于STM32F10x的UCOS-II移植代码，本源码提供了移植好的任务函数，按照程序中的方式去写自己的任务变得简单。UCOS-II由于其小巧且易移植，因此应用很广泛，在ST单片机上的移植更为实用

UC/OS-II在ARM7上移植的源码，内容齐全，在网上被多次下载-UC/OS-II ARM7 transplant source, as complete, and the Internet being repeatedly downloaded

Included uCOS documents. Its been explained fantastically with simple english. Have read many rtos documents, But the rtos concept explained here is simple, basic and to the point.

这次发个ucos270的ucosii，其他代码我会陆续发送，请等待-Ucos270 the fat of the ucosii, other code I would have sent, please wait

UCOS在44B0的移植，需要一点小修改-UCOS in 44B0 transplant and will need some minor edits

uCOS在Cortex-M3芯片上的移植，使用IAR EWARM-uCOS in the Cortex-M3 chips transplantation, the use of IAR EWARM

Keil下的uCOS-ii+GUI(ForLPC214x)-Keil under uCOS-ii+ GUI (ForLPC214x)