ucos

iptv机顶盒源码,包括原理图在内，UCOS-II系统-iptv set-top box source, including schematics, including, UCOS-II system

说明：  ucos ii 移植stc 516系列单片机 内容很全 很详细 (ucos ii transplantation stc 516 Series MCU They are very very detailed)

LPC2368驱动淘宝上27元钱的TFT的代码，包含了uCOOS+uCGUI，希望各位能够用得到：），已通过测试。 (27 dollars of the TFT the LPC2368 drive Taobao code contains uCOOS+uCGUI hope you will be able to get :), has been tested.)

无需要外扩RAM的RTOS-no RAM expansion needs of the RTOS

ucOS + ucGUI 人机界面 源码 加入触摸屏校准功能。 >> 校准后触摸屏参数保存在STM32芯片自身的Flash中。 >> 当第一次启动程序或者全部擦除芯片后第一次启动将会执行校准。 >> 也可以在设置功能中选择“触摸屏校准”手动执行校准，前提是当前触屏参数和真实值相差不大，可以进入到触摸屏校准选项(ucOS+ ucGUI HMI experiment source Code)

uCOS/II下用的图形系统说明-uCOS/II under the Note graphics system

uC/OS操作系统在51平台的移植代码，编译环境为Keil C51-uC/OS platform in 51 transplant code, compile environment for the Keil C51

lpc1768 uCgui工程模板代码，结构清晰。(Lpc1768 uCgui project template code, structure is clear.)

这是本人调用small rtos51的函数来仿真写的基本代码-This is a small rtos51 I call a function to write the basic code simulation

本文将指导读者一步步完成 LwIP 在 ADS1.2 开发环境下的移植工作，包括底层驱动的编写。本文使用的硬件平台是 AT91SAM7X256 + RTL8201BL(PHY)，至于软件平台，读者从本文标题即可看出。-This article will guide the reader step by step to complete LwIP ADS1.2 development environment in the transplant, including the preparation of the underlying drivers. This hardware platform is AT91SAM7X256+ RTL8201BL (PHY), As for the software platform, readers can see from the article title.