本文将一步完成LwIP ADS1.2开发引导读者一步一步…

UCOS 在ARM S3C 2410上的移植(ARM S3C 2410 in UCOS the transplant)

主要实现功能： 1 tcp server并发（主要涉及文件app_lwip.c、app_tcp_server.c） 2 网线热插拔（主要涉及文件app_lwip.c、app_tcp_server.c） 3 不重启修改ip地址（主要涉及文件app_lwip.c、app_tcp_server.c、app_key.c（按键修改ip地址）） 4 将lwip的数据接收从中断方式改成单独的接收任务方式（主要涉及文件app_lwip.c） 5 usb串口信息打印（115200波特率） 6 注意：使用的stm32的HAL库而不是标准库(The main functions are: 1 TCP server concurrency (mainly related to file app_lwip.c, app_tcp_server.c) Hot plugging of 2 network lines (mainly related to documents app_lwip.c, app_tcp_server.c) 3 do not reset the IP address (mainly related to file app_lwip.c, app_tcp_server.c, app_key.c (key modify IP address)) 4 change the data reception of LwIP from the interrupt mode to the individual receiving task (mainly involving the file app_lwip.c) 5 USB serial port information printing (115200 baud rate) 6 note: the HAL Library of the STM32 used instead of the standard library)

一个UCOS下的经典例程，用BC4.5编译（也可以运行MAKETEST），如果你用的BC3或者其它版本的话，把目录强行改为BC45就可以了.-a UCOS the classic routines with BC4.5 compiler (also can run MAKETEST), if you use other versions or BC3, then what Contents forced to Cooking on it.

从软盘向内存 加载 程序的 asm 源码 开发工具 masm 5.1 结合debug 可以加载很多东西-from floppy disk to memory loading procedures asm-source development tools can integrate debug 5.1 can load a lot of things

舵机控制（按键实现），通过按键来控制舵机的旋转（值固定）(Steering gear control (key-press implementation))

ucgui在windows下的移植-ucgui windows in the transplant

源代码 ，例程 ，该例程为uCOSII2.91+UCGUI3.90A使用例程，源代码(Source code, routine, the routine is uCOSII 2.91 + UCGUI3.90A use routine, source code)

这是关于UC/OS-II在ARM7上移植的源码，内容齐全，在网上被多次下载-This is on the UC/OS-II ARM7 transplant source, as complete, and the Internet being repeatedly downloaded

ucos_ii 在microblaze平台上的移植-ucos_ii mainly due to the platform migration

一个AT91SAM7X256 USART驱动实验，硬件环境为at91sam7x-ek开发板，开发环境为iar。-An experimental AT91SAM7X256 USART driver, hardware environment at91sam7x-ek development board, development environment for iar.