在ZLG的LPC211X开发板上没有D12 USB驱动的源程序，自己从LPC2210开发板上更改后的源程序，可以供大家参考。 文件： Usb.HEX...

mcf522xx EV板的驱动程序源码，可以直接使用。该驱动本人测试过。-mcf522xx EV Board driver source code can be used directly. The driver I tested.

该代码在KEIL平台基础上实现LPC2132与MAX485进行RS485通信-The code in KEIL platform based on the LPC2132 with the MAX485 for RS485 communication

ucos-ii源代码，有兴趣的可以下载移植一下。-UCOS-II source code

philips的ARM处理器LPC2114跑ucosii的程序包，实现了包括zlg7290键盘和数码管驱动，128*64液晶屏，跑马灯程序的多任务实例。-philips LPC2114 ARM processor running ucosii the package, Implementation, including keyboard and digital zlg7290 driven, 128* 64 LCD screen, Bomadeng procedures example of multi-tasking.

说明：  这是按照前面我发的从零开始学习ucosii手册，编写成功的模板。芯片是stm32f103c8t6，移植在f103芯片上，都是同理可得。记住虽然可以直接拿着用，但是要修改对应的IO口哦，程序效果是led小灯闪烁。（有一个问题我也不太清楚，理论上c8t6的启动文件应该是startup_stm32f10x_md.s，但是用它却不能成功。用startup_stm32f10x_hd.s却成功了。）(This is a successful template written in front of the uCOSII manual that I started from zero. The chip is stm32f103c8t6, and the transplant is on the F103 chip. Remember that although it can be used directly, but to modify the corresponding IO mouth Oh, the program effect is the LED light flicker. (there is one problem I'm not very clear about. In theory, c8t6's startup file should be startup_stm32f10x_md.s, but it can't be successful with it. It was successful with startup_stm32f10x_hd.s.))

嵌入式arm7的tcp/ip协议的实现，开发环境为ads1.2，可以实现tcp和udp的通信-Embedded arm7 the tcp/ip protocol implementation, development environment for ads1.2, can be achieved tcp and udp communication

ucos-ii中发送一个互斥信号mutex源码-ucos-ii Send a mutex mutex signal source

ucos-II的shell开发，指示性代码，主要针对8051单片机，包括相关控件函数（转载）-CENTER-II shell development, indicative code, mainly aimed at 8051, including relevant control function (reproduced)

lpc2300 技术笔记开发例程 usbExample-Technical Note Development lpc2300 routine usbExample

ucprobe 源码 micrium。系统状态监视工具(ucprobe micrium)