ucosII2.8,最新版本强烈推荐不要客气共同学习

SC28L198是一个带有8个全双工异步通道UART的芯片，每个UART通道的接收器和发送器都拥有16字节深度的FIFO。芯片的每个UART通道除了基本的异步通信功能外，还可实现软件流控制（in-band flow control）、硬件流控制（out-of-band flow control）、以及多点模式（唤醒模式或RS-485模式）等，同时每个UART都有4个外扩的I/O引脚，每个外扩I/O引脚都为功能复用。 本资料包含完整测试程序，应用文档，电路原理图及PPT演示文档等。(SC28L198 is a full-duplex asynchronous channels with 8 chip UART, each UART channel receiver and transmitter have 16-byte deep FIFO. Each UART channel chip, the asynchronous communication addition to the basic functions, but also for software flow control (in-band flow control), hardware flow control (out-of-band flow control), as well as multi-point mode (wake-up mode, or RS-485 mode), etc., and each UART has a 4 outer expansion of the I/O pins, each outer expansion I/O pins are as functional reuse. This information includes a complete test program, application documents, the circuit schematic diagram and PPT presentation documentation.)

这是本人调用small rtos51的函数来仿真写的基本代码-This is a small rtos51 I call a function to write the basic code simulation

基于ZLGFS的BOOT,可以通过源码学习BOOT的运行流程，设计出自己的BOOT-ZLGFS based on the BOOT, can learn BOOT-source operating flow, design their own BOOT

这是ucos在Freescale9s12XS128上移植成功并测试成功的代码(This is ucos in Freescale9s12XS128 successfully transplanted and successfully tested on the code)

LPC2300基础驱动库用户手册,CHM文档(LPC2300 based on database-driven user' s manual, CHM documents)

从软盘向内存 加载 程序的 asm 源码 开发工具 masm 5.1 结合debug 可以加载很多东西-from floppy disk to memory loading procedures asm-source development tools can integrate debug 5.1 can load a lot of things

移植到UCGUI上的汉字库16x16-transplanted to the 16x16 Store

移植到MCS51的uCOS_II的串口程序。-transplanted to the MCS51 uCOS_II Serial procedures.

at91sam7x的最新版Ucos-II内核源码.-Ucos-II for at91sam7x

可直接用于Atmel AT91SAM7X256_EK板的简单Web服务器程序， AT91SAM7X256（MAC)+DM9161AE（PHY），Web程序中设定的IP地址192.168.131.200,MAC地址 00-30-6C－00-00-02详见emac_lib.h与ethernetif.c,可在IE浏览器中输入查看，注：MDIX跳线未短接时，PC与EK板均需要通过UTP网线接至交换机，MDIX短接时可用网线直连PC。-Can be used directly Atmel AT91SAM7X256_EK board a simple Web server program, AT91SAM7X256 (MAC)+ DM9161AE (PHY), Web procedure set IP address of 192.168.131.200, MAC address 00-30-6C-00-00-02 see emac_lib.h and ethernetif.c, in IE browser, enter the view, note: MDIX when the jumper is not shorted, PC and EK boards come through UTP cable connected to the switch, MDIX cable shorted available when Direct Connect PC.