说是ucos2的完整代码,我看了后的确不错

我 Porting 的 uC/OS-II V2.84 (目前Micrium)最新版之 Keil C51 工程,专供给 8051 上做任务调度,我已将 Code Size 改小至 4000 Byte,对于 X-Ram 的用量也仅 160 Byte(于 Keil C51 V8.08a 下编译后).我在 Main.c 内创建了两个任务调度的 LED 闪烁程序,方便了解任务是如何被创建的,同时我也在 Keil C51 的 Project 内设好了 Simulator 模式及 Port 1 窗视可即时的观测这两个任务调度情况.-I Porting the uC/OS-II V2.84 (currently Micrium) the latest version of the Keil C51 works exclusively on the supply of 8051 to do mission scheduling, I have Code Size改小to 4000 Byte, the usage of X-Ram is only 160 Byte (in Keil C51 V8.08a compiled). I main.c create two task scheduling of the LED flashing procedures to facilitate the understanding of how the mission was founded at the same time I Keil C51 is also equipped with the Project Good the Simulator Mode and Port 1 window, as can be observed real-time task scheduling of these two cases.

ucos2.76 for LPC2129

焦海波的lwip在ucosII的移植笔记及其源码，源码软件环境为：ADS 1.2，LWIP1.1.1，ucos2.76。硬件环境为ARM7-AT91SAM7X256，PHY为RTL8201BL。移植笔记的源码不好找，特此上传。(Jiao Haibo- the transplant notes of The lwip in ucosII. It s notes source. Software environment: ADS 1.2, LWIP1.1.1 ucos2.76. Hardware environment: ARM7-The AT91SAM7X256, the PHY is put the RTL8201BL. The source of Transplantation notes is hard to find, so upload here.)

uCOS II的FS44B0X II移植版本，直接编译就可以在板子上跑了-uCOS II FS44B0X transplant II version can be directly translated in a run on the board

MiniTerm STM32 ucGui

ucos移植论文集-It s an uCOS transplaning dissertation.

ucosii 的内核分析,精简内核，初学者的理想入门材料(ucosii is a very useful OS ,as a learner, you can get konwledge from it)

DVB软件,基于CT216软件的开发源程序.-DVB

avr ucos 不错的学习代码 AVR Studio WINAVR-2005** VMLAB3.12(avr ucos Atmega16 AVR Studio WINAVR-2005** VMLAB3.12)

AMR7 小型文件系统驱动。 LPC2138基于ucos的中间件，可进行基于FAT32的基本文件操作. (AMR7 small file system driver. Based on the LPC2138 OUT middleware can be conducted based on the basic FAT32 file manipulation.)