altera公司cpld/fpga开发软件quartus2中文使用教程

频率计VHDL编程。设计一个4位数字显示的十进制频率计，其测量范围为1MHz，测量值通过4个数码管显示以8421BCD码形式输出，可通过开关实现量程控制，量程分10kHz、100kHz、1MHz三档(最大读数分别为9.999kHz、99.99kHz、999.9kHz)； 当输入信号的频率大于相应量程时，有溢出显示。 -Cymometer VHDL programming. Design of a 4-digit decimal display frequency, the measurement range of 1MHz, the measured value through the four LED 8421BCD code shows the form of output can be controlled through the switch range, range at 10kHz, 100kHz, 1MHz Three (maximum reading were 9.999kHz, 99.99kHz, 999.9kHz) when the input signal is greater than the corresponding frequency range, it shows overflow.

4tap FIR filter in verilog code

液晶ST7565P_12864驱动，实现打点成图。(LCD ST7565P_12864 drive, dot mapping.)

本人上网下载下来并调试过的，完全实现NIOS 下对SD卡读写及包括FAT16文件系统的实现，使用的是QT8.1，FPGA里实现，里面有详细接线图，是完整的一个工程，在EP2C20Q240C8里调试成功-I downloaded off the Internet and debug off, and the full realization of NIOS under the SD card reader and includes FAT16 file system implementation, using QT8.1, FPGA years to achieve, which detailed wiring diagram, is a complete one project in EP2C20Q240C8 debug in the success of

verilog数字系统设计，一本很好的verilog学习的书籍，很适合初学者(verilog digital system design, a good verilog learning books, it is suitable for beginners)

DESCRIPTION OF FULL ADDER

de2,altera fpga

在ISE12.4与TMS320F2812的XINTF接口，实现数据收发(In ISE12.4 TMS320F2812 the XINTF, data transceiver)

这是一个利用xilinx的macroblaze将用户程序由flash读取至ddr内存的例程，关键是bootloader的写法。-This is a use of Xilinx macroblaze the user program will read from flash memory to ddr routine, the key is the wording of bootloader.

这是一个计算器的Verilog代码，可实现加减乘除等基础功能(calcultor for you to do some reserches.)