精密电容测量仪

freescale ep100 ECT捕捉中断程序，按程序中代码初始化即可启动使用捕捉中断，代码已经经过调试。-freescale ep100 ECT capture interrupt program, according to the procedure in the initialization code to activate the use of capture interrupt, the code had already been debugging.

80TFT彩屏配套测试程序，包括连接方式和pdf说明程序中SD卡部分定义如下：//定义SD卡需要的4根信号线sbit SD_DO  = P1^0;sbit SD_CLK = P1^1;sbit SD_DI  = P1^2;sbit SD_CS  = P1^3;2.4或者1.77寸液晶板上J3插针上符号引脚如下，用杜邦线把对应的脚连接起来DOUT--P1.0SCK --P1.1DIN --P1.2CS  --P1.3 

SAM9261 BasicMMU Example code with ADS1.2 (163 kB) The goal of this project is to show how to use a PC100 SDRAM and the MMU to perform a rating with a 100MHz Bus Clock. The rating is based on Dhrystone 2.1. It shows the rate when I+D Caches are disabled or enabled, with or without MMU and I Cache is disable or enabled, with or without MMU. -SAM9261 BasicMMU Example code with ADS1.2 (163 kB) The goal of this project is to show how to use a PC100 SDRAM and the MMU to perform a rating w praxiology a 100MHz Bus Clock. The rating is based on Dhr ystone 2.1. It shows the rate when I Caches are d D. isabled or enabled, with or without MMU and I Cache is disable or enab led, with or without MMU.

Montavista公司在嵌入式linux领域领先，此为他的产品介绍，和在中国的解决方案。-Montavista in leading embedded Linux, which was his products, in China and the solutions.

资源描述 资源描述 1.硬件使用的是STM32F407的平台， 2.通过GPRS实现远程IAP升级，使用的是标准ymodem传输协议， 3.编译工具MDK4.7，代码已经调试通过。

卡上芯片-EM4100_DS.pdf RFID-Card-EM4100_DS.pdf RFID chips

D12 USB设备控制芯片驱动程序代码，是学习USB设备驱动编程的好资料-D12 USB device controller driver code, is a USB device driver programming learning good information

ADS 开发环境使用指南，有比较详细的基本步骤和操作方法-ADS development environment, the use of guidelines, there is a more detailed method of the basic steps and operating

tms320c5409 equz source code

多跳路由的温度采集程序，采用Tinyos 编写，想学习WSN可以做为参考-Multi-hop routing temperature acquisition procedure for the preparation of TinyOS, want to learn WSN can be used as reference